NETGEAR PS111W manual Tcp/Ip, TCP/IP Configuration Fields

Page 21

NetGear Print Server Manual

TCP/IP

The TCP/IP configuration screen is used to configure the IP address of the print server. Figure 3-3 shows the TCP/IP configuration screen and following table lists its fields, describes the functions, and explains how to provide information in each field.

Figure 3-3 TCP/IP Configuration Screen

TCP/IP Configuration Fields

DHCP Client

IP Address

Subnet Mask

Gateway

Address

Save

Cancel

Buttons

This field allows you to enable or disable the print server's ability to get its IP address from a DHCP (Dynamic Host Configuration Protocol) server. When disabled, you can provide a fixed IP address in the following fields. If DHCP client is enabled, the fields that follow are not used.

This IP address is assigned to the print server. If you have a private LAN and do not plan to connect to the TCP/IP based internet, NETGEAR recommends that you use the address from the IETF-designated private addresses (for example, 192.168.x.x or 10.x.x.x).

This subnet mask defines the range of addresses that are reachable on your local LAN. For example, in a network with a NETGEAR router, the default subnet mask is usually 255.255.255.0.

This is the IP address of the router on your network. For example, in a network with a NETGEAR router, the gateway address is usually 192.168.0.1.

Save:

After the configuration, click on ‘Save’ button to save the value permanently to PS111W. Cancel:

If changed something that is not good, click on ‘Cancel’ button will load the value back from PS111W. No modification will be made into PS111W.

12

Image 21

Contents Installation and Reference For Netgear PS111W Print Sever 2000, 2002 by NETGEAR, Inc. All rights reserved Bestätigung des Herstellers/Importeurs United States 888-NETGEAR Preface PurposeAudience Related Publication ConventionsSpecial Message Formats Use of Enter, Type, and PressChapter List of FTP Files and Commands Supported by the Print Server Appendix C Config File Introduction FeaturesFront Panel of the Model PS111W Print Sever Front PanelLED Descriptions LEDsLabel Color Activity Description2Rear Panel of the Model PS111W Print Sever Rear PanelInstallation Verifying Package ContentsPreparing the Site Connecting Devices to the Print Server Verifying Power Configuring Print Server for TCP/IP Connecting to the Print ServerWeb Management for Print Server Server Status Browser Menu selections and Configuration ScreensSystem Configuration Screen Configure ServerPrint Server Name Password Confirm Password Enable Protocols Configure Server FieldsTCP/IP TCP/IP Configuration FieldsAppleTalk Apple Talk Configuration FieldsConfiguration fields and buttons WirelessRegulatory Domain Station Name Channel NoNetwork Type WEP Data Privacy Fields Wireless Link Info Fields Wireless Link InfoStat Associated Current Channel Current Tx Rate ThroughputPrinter Port Printer PortLogical Port Fields Logical PrinterButtons Reset Printing in Windows Microsoft Windows System PrintingPrint Server Installation Netgear Print Server Software InstallationInformation Components Destination Location Page There will be a program group created and shown as below Page Netgear Print Server software Icon Setting Up Your PC to Recognize the Print ServerNetGear Print Server Manual To set up each PC Click on Next Select the PS111W print server and click on Next Auto-IP 13 Set up TCP/IP for Print Server to get an IP address Wireless Configuration 14 Wireless Configuration Click on Finish Click on OK Netgear Add Printer Wizard Write Down the Port NameAddport Window Epson Connection 19 Epson Spool Manager Queue Setup WindowWrite Down the Port Name ADD Port WindowSelect Printer Port for Add Printer Wizard Add a printer to your system to print22 Find and select the printer port 23 Add Printer Wizard 24 Use Existing Driver for Add Printer Wizard 25 Name Your Printer for Add Printer Wizard 26 Share Printer for Add Printer Wizard If you answer Yes to print a test page, see Figure 29 Completing the Add Printer Wizard Unix Printing Using TCP/IP Temporary IP Address Resolution Assigning an IP Address to the Print Server Using DhcpAssigning an IP Address to the Print Server Using BootP Assigning an IP Address to the Print Server Using Rarp Assigning an IP Address to the Print Server Using ARP Arp -s Name 00c002xxyyzz Configuration Example Configuring Your Print Server Using FTPFTP Commands File Name Purpose ModeFTP Files in the Directory LPD Configuration and Printing Setting the Print MethodAction Sample Command Sample Commands for Using LPD on SystemAction Sample Commands for Using LPD on BSDPrinting Using FTP Printing Using LPDPrinting Using DSI Socket Number DefinitionsAppleTalk Printing Setting up Print Server for AppleTalkSetting up Host Computer Sample CONFIG.3P Configuration File Using PSTool UtilityPSTool Utility Config File Format PSTool Utility Config File EntriesEntry inConfig File Description Using Advanced Management Tools Advanced Button ButtonsBrowse Button Advanced Print Server Configuration System TabField Description System Tab Fields TCP/IP Tab Window TCP/IP TabAppleTalk Tab AppleTalk TabLogical Port Tab Window Logical Port TabPhysical Port Tab Physical Port Wireless TabSsid Use the same Channel number Link Info Screen Wireless Link InfoControl Menu Menu OptionsPrinter Menu Help Menu Configuring Using IP SetupGeneral Specifications Appendix a Technical SpecificationsEN 55 022 Cispr 22, Class B Vcci Class B ITE Appendix B Understanding IP Addresses IP Addresses and the InternetThree Main Address Classes Netmask Example of Subnetting a Class B Address Subnet AddressingNetmask Notation Translation Table for One Octet Number of Bits Dotted-Decimal ValuePrivate IP Addresses Netmask FormatsDotted-Decimal Masklength IP Configuration by Dhcp Address Resolution ProtocolConfig File TCP/IP Settings Appendix C Config FileConfiguration Settings Parameter and CommandLogical Printer Line Numbers Config File Line NumbersOverview Appendix D Using NetWare 5 NdpsCreating an Ndps Manager Object Create Ndps Manager Object WindowCreate Printer Agent Window Creating an Ndps Printer AgentConfigure Port Handler Window Workstation ConfigurationClick on Close Appendix E IP Setup IP Configuration SettingsSetting Recommended Value Hexadecimal Value Ascii Character Appendix F Ascii to Hexadecimal Conversion TableNetGear Print Server Manual NetGear Print Server Manual

Related manuals

Manual 21 pages 56.15 Kb