NETGEAR PS111W manual Advanced Print Server Configuration, System Tab, Field Description

Page 77

NetGear Print Server Manual

7-2 Advanced Print Server Configuration

From the main menu, click on the Advanced button to use the advanced configuration procedure. The Advanced Print Server Configuration screen opens.

The Advanced Print Server Configuration screen contains the fields listed on tabs that can be selected in any order to customize the configuration of the print server. The following field tabs are provided by the Advanced Print Server Configuration screen:

System

TCP/IP

NetBEUI

Logical Port

Physical Port

Wireless

Each tab is described in the following sections.

There are two control buttons associated with every tab, and there is a "Return to Main Menu" button at the bottom of the tab. The function of each button is described in the table bellow.

Control Buttons on All Tabs

Field

Description

 

 

Restore to

This button appears on many screens. Clicking it replaces the onscreen values with the default settings. The

Default

tab settings are not saved until you click on the Save to Device button. The quickest way to set all device

 

values to the factory default setting is to click on the Configuration selection on the menu bar and select

 

Restore Factory Default.

 

 

Save to

Click this button to write any changed configuration information to the print server.

Device

If you switch to another tab without clicking on the Save to Device button, all new settings are lost.

 

 

Return to

Click this button to return to the print server administration main menu. If you want to configure another print

Main

server, you must click on this button to return to the main menu and select another print server.

Menu

 

 

 

Any configuration change is lost unless you click on the Save to Device button at the bottom of the field window to send the configuration to the print server. When moving into a new field screen, all settings in the previous screen are lost. It is essential that you make a decision on the present field screen whether to abandon or save the new parameters into the print server.

The menu bars and their fields are described in the following sections.

System Tab

The System tab contains the fields to change the print server name and activate or disable the various networking protocols supported by the print server.

68

Image 77
Contents Installation and Reference For Netgear PS111W Print Sever 2000, 2002 by NETGEAR, Inc. All rights reserved Bestätigung des Herstellers/Importeurs United States 888-NETGEAR Audience PrefacePurpose Related Publication ConventionsSpecial Message Formats Use of Enter, Type, and PressChapter List of FTP Files and Commands Supported by the Print Server Appendix C Config File Introduction FeaturesFront Panel of the Model PS111W Print Sever Front PanelLED Descriptions LEDsLabel Color Activity Description2Rear Panel of the Model PS111W Print Sever Rear PanelPreparing the Site InstallationVerifying Package Contents Connecting Devices to the Print Server Verifying Power Web Management for Print Server Configuring Print Server for TCP/IPConnecting to the Print Server Server Status Browser Menu selections and Configuration ScreensSystem Configuration Screen Configure ServerPrint Server Name Password Confirm Password Enable Protocols Configure Server FieldsTCP/IP TCP/IP Configuration FieldsAppleTalk Apple Talk Configuration FieldsConfiguration fields and buttons WirelessRegulatory Domain Station Name Channel NoNetwork Type WEP Data Privacy Fields Wireless Link Info Fields Wireless Link InfoStat Associated Current Channel Current Tx Rate ThroughputPrinter Port Printer PortLogical Port Fields Logical PrinterButtons Reset Printing in Windows Microsoft Windows System PrintingPrint Server Installation Netgear Print Server Software InstallationInformation Components Destination Location Page There will be a program group created and shown as below Page Netgear Print Server software Icon Setting Up Your PC to Recognize the Print ServerNetGear Print Server Manual To set up each PC Click on Next Select the PS111W print server and click on Next Auto-IP 13 Set up TCP/IP for Print Server to get an IP address Wireless Configuration 14 Wireless Configuration Click on Finish Click on OK Netgear Add Printer Wizard Write Down the Port NameAddport Window Epson Connection 19 Epson Spool Manager Queue Setup WindowWrite Down the Port Name ADD Port WindowSelect Printer Port for Add Printer Wizard Add a printer to your system to print22 Find and select the printer port 23 Add Printer Wizard 24 Use Existing Driver for Add Printer Wizard 25 Name Your Printer for Add Printer Wizard 26 Share Printer for Add Printer Wizard If you answer Yes to print a test page, see Figure 29 Completing the Add Printer Wizard Unix Printing Using TCP/IP Assigning an IP Address to the Print Server Using BootP Temporary IP Address ResolutionAssigning an IP Address to the Print Server Using Dhcp Assigning an IP Address to the Print Server Using Rarp Assigning an IP Address to the Print Server Using ARP Arp -s Name 00c002xxyyzz Configuration Example Configuring Your Print Server Using FTPFTP Files in the Directory FTP CommandsFile Name Purpose Mode LPD Configuration and Printing Setting the Print MethodAction Sample Command Sample Commands for Using LPD on SystemAction Sample Commands for Using LPD on BSDPrinting Using FTP Printing Using LPDPrinting Using DSI Socket Number DefinitionsAppleTalk Printing Setting up Print Server for AppleTalkSetting up Host Computer Sample CONFIG.3P Configuration File Using PSTool UtilityEntry inConfig File Description PSTool Utility Config File FormatPSTool Utility Config File Entries Using Advanced Management Tools Advanced Button ButtonsBrowse Button Field Description Advanced Print Server ConfigurationSystem Tab System Tab Fields TCP/IP Tab Window TCP/IP TabAppleTalk Tab AppleTalk TabLogical Port Tab Window Logical Port TabPhysical Port Tab Physical Port Wireless TabSsid Use the same Channel number Link Info Screen Wireless Link InfoControl Menu Menu OptionsPrinter Menu Help Menu Configuring Using IP SetupGeneral Specifications Appendix a Technical SpecificationsEN 55 022 Cispr 22, Class B Vcci Class B ITE Three Main Address Classes Appendix B Understanding IP AddressesIP Addresses and the Internet Netmask Example of Subnetting a Class B Address Subnet AddressingNetmask Notation Translation Table for One Octet Number of Bits Dotted-Decimal ValueDotted-Decimal Masklength Private IP AddressesNetmask Formats IP Configuration by Dhcp Address Resolution ProtocolConfig File TCP/IP Settings Appendix C Config FileConfiguration Settings Parameter and CommandLogical Printer Line Numbers Config File Line NumbersOverview Appendix D Using NetWare 5 NdpsCreating an Ndps Manager Object Create Ndps Manager Object WindowCreate Printer Agent Window Creating an Ndps Printer AgentConfigure Port Handler Window Workstation ConfigurationClick on Close Setting Recommended Value Appendix E IP SetupIP Configuration Settings Hexadecimal Value Ascii Character Appendix F Ascii to Hexadecimal Conversion TableNetGear Print Server Manual NetGear Print Server Manual
Related manuals
Manual 21 pages 56.15 Kb