ProSafe Plus Switch Utility
Set the IP Address Information
Enter IP address and subnet mask values for the switch as well as the address of the gateway device used by the switch.
To specify IP interface information:
1.Select System > Status > Switch Information. The Switch Information screen displays.
2.In the DHCP Mode field, select Disable. The IP Address, Subnet Mask, and Gateway Address fields are enabled.
3.Enter the IP address, subnet mask, and if available gateway address and click Apply.
Maintenance
The Maintenance feature allows you to change the password for the selected switch, perform a device reboot, reset the switch to its factory default settings, or upgrade the switch firmware.
Change Password
To change the password for a switch:
1.Select System > Maintenance. The Maintenance menu and Change Password screen display.
2.Enter the old password (the default is password) and then enter the new password.
3.Click Apply.
Device Reboot
WARNING:
Rebooting the switch briefly disrupts network traffic through the switch.
To reboot the selected switch:
1.Select System > Maintenance > Device Reboot. The Device Reboot dialog displays.
2.Select the check box in the Device Reboot dialog.
3.Click Apply.
System Configuration
15