ProSafe Plus Switch Utility
© 2012 NETGEAR, Inc. All rights reserved
No part of this publication maybe reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language in any form or by any means without the written permission of NETGEAR, Inc.
NETGEAR, the NETGEAR logo, and Connect with Innovation are trademarks and/or registered trademarks of NETGEAR, Inc. and/or its subsidiaries in the United States and/or other countries. Information is subject to change without notice. Other brand and product names are registered trademarks or trademarks of their respective holders.
Technical Support
Thank you for choosing NETGEAR. register your product, get the latest product updates, get support online, or for more information about the topics covered in this manual, visit the Support website at:
http://support.netgear.com
Phone (US & Canada only):
Phone (Other Countries): Check the list of phone numbers at:
http://support.netgear.com/app/answers/detail/a_id/984
Statement of Conditions
To improve internal design, operational function, and/or reliability, NETGEAR reserves the right to make changes to the products described in this document without notice. NETGEAR does not assume any liability that might occur due to the use, or application of, the product(s) or circuit layout(s).
Revision History
Publication Part Number | Publish Date | Comments |
|
|
|
May 2012 | LAG and registration features were added. | |
|
|
|
September 2010 | Multicast and IGMP Snooping features were | |
|
| added. |
|
|
|
February 2010 | Multiple language support added to menus, | |
|
| cable testing, Rate Limiting, and Broadcast |
|
| Filtering features were added. |
|
|
|
September 2009 | First publication. | |
|
|
|
2