NETGEAR JGS524E-100NAS manual  To configure Broadcast Filtering

Page 29

ProSafe Plus Switch Utility

To configure Broadcast Filtering:

1.Select System and select the radio button for the switch you want to configure.

2.Select QoS > Broadcast Filtering to display the QoS Broadcast Filtering screen.

3.Select Enable.

If the selected switch supports configuring individual ports, a Storm Control Rate screen is displayed. If the selected switch does not support individual port configuration, all of the ports is set to a predetermined storm control rate.

4.If the ports can be configured, select one or more ports, and the desired storm control rate.

5.Click Apply.

Quality of Service

29

Image 29

Contents ProSafe Plus Switch Utility Revision History Technical SupportStatement of Conditions Contents Quality of Service Getting Started Install the ProSafe Plus Switch Utility To install the utility Registration Pop-Up Window Discovering SwitchesClick Install Utility Utility Features Overview QoS Quality of Service System General Configuration and InformationSwitch Settings Vlan Virtual LAN networks To uninstall the utility Uninstall the UtilitySystem Features System ConfigurationSystem Configuration Status Switch Selection To select a switch  To enable Dhcp operation Switch InformationDhcp Mode Selection Change Password MaintenanceDevice Reboot Set the IP Address InformationFirmware Upgrade Reset Factory DefaultsMonitoring Port StatisticsEnable Mirroring  To have a switch port see the data on another portPort Mirroring Cable TestIgmp Snooping MultiCastStatic LAG Link Aggregation Group for JGS524E Only Vlan Overview Virtual LAN ConfigurationBasic Port Based Vlan Configuration Port-Based ConfigurationAdvanced Port Based Vlan Configuration  To assign members of a Vlan groupBasic 802.1Q Vlan Configuration 802.1Q Based ConfigurationAdvanced 802.1Q Vlan Configuration Vlan ConfigurationPort Pvid Vlan MembershipPort Tagging  To add ports to a Vlan groupSelect UnTag Tagging Control  To tag data from ports To untag data from ports QoS Overview Quality of ServiceQoS Global Configuration Default Settings QoS Global Configuration To assign Port Based priorities Broadcast Filtering  To configure Rate LimitingRate Limiting  To configure Broadcast Filtering Online Help HelpSupport Information About the UtilityUser Guide Click Register Registration To register your product Supplemental Information Default Switch Settings Default SettingsProSafe Plus Switch Utility Default Switch Settings Index Product Name & Model