NETGEAR JGS524E-100NAS manual 802.1Q Based Configuration, Basic 802.1Q Vlan Configuration

Page 22

ProSafe Plus Switch Utility

802.1Q Based Configuration

802.1Q VLAN configuration can be done using basic or advanced methods.

Basic 802.1Q VLAN Configuration

In Basic 802.1Q VLAN configuration you configure ports to a VLAN Group ID (1-4093 or all).

To configure ports using 802.1Q criteria:

1.Select the switch.

2.Select VLAN. This displays the Port-Based VLAN configuration screen.

3.Select 802.1Q on the menu.

4.Select Enable.

5.For each port to be configured, enter the VLAN Group ID (1-4093 or all) in the field below the port.

6.When you are finished configuring ports, click Apply.

Advanced 802.1Q VLAN Configuration

In Advanced 802.1Q VLAN configuration you configure ports to a VLAN Group ID (1-4093 or all). The advanced configuration feature allows you to create and update VLAN groups with additional information.

VLAN Configuration

The VLAN Configuration feature lists the currently defined VLANs and the ports assigned to each.

To add VLAN groups:

In the VLAN ID field at the bottom right of the screen, enter the VLAN ID (1-4094) for the VLAN you want to configure and click Add. The new VLAN group is displayed in the VLAN ID column.

7.After you have created a new VLAN ID click VLAN Membership to add ports to the group. See VLAN Membership on page 23.

To delete a VLAN group:

1.Select the check boxes for the VLANs to be deleted. Selecting the check box at the top of the column selects all VLAN IDs.

2.Click Delete. The selected VLAN groups are deleted.

Virtual LAN Configuration

22

Image 22
Contents ProSafe Plus Switch Utility Statement of Conditions Technical SupportRevision History Contents Quality of Service Install the ProSafe Plus Switch Utility Getting Started To install the utility Click Install Utility Discovering SwitchesRegistration Pop-Up Window Utility Features Overview Switch Settings System General Configuration and InformationQoS Quality of Service Vlan Virtual LAN networksUninstall the Utility  To uninstall the utilitySystem Configuration System FeaturesSystem Configuration  To select a switch Switch SelectionStatus Dhcp Mode Selection Switch Information To enable Dhcp operation Device Reboot MaintenanceChange Password Set the IP Address InformationMonitoring Reset Factory DefaultsFirmware Upgrade Port StatisticsPort Mirroring  To have a switch port see the data on another portEnable Mirroring Cable TestMultiCast Igmp SnoopingStatic LAG Link Aggregation Group for JGS524E Only Virtual LAN Configuration Vlan OverviewAdvanced Port Based Vlan Configuration Port-Based ConfigurationBasic Port Based Vlan Configuration  To assign members of a Vlan groupAdvanced 802.1Q Vlan Configuration 802.1Q Based ConfigurationBasic 802.1Q Vlan Configuration Vlan ConfigurationPort Tagging Vlan MembershipPort Pvid  To add ports to a Vlan group To untag data from ports  To tag data from portsSelect UnTag Tagging Control Quality of Service QoS OverviewQoS Global Configuration QoS Global Configuration Default Settings To assign Port Based priorities Rate Limiting  To configure Rate LimitingBroadcast Filtering  To configure Broadcast Filtering Help Online HelpUser Guide About the UtilitySupport Information  To register your product RegistrationClick Register Supplemental Information Default Settings Default Switch SettingsProSafe Plus Switch Utility Default Switch Settings Index Product Name & Model