ProSafe Plus Switch Utility
Default Settings
All ProSafe Plus switch features have default settings You do not need to configure any settings to use the ProSafe Plus switches The following table lists the default values for switch settings Shaded features are not configurable on all switches
Table 3. Default Switch Settings
Tab | Menu | Feature | Default Value |
System | Status | Switch Selection | No switch selected |
|
|
|
|
|
| Names | All names blank |
|
|
|
|
|
| Passwords | “password” for all switches |
|
|
|
|
|
| Switch Information |
|
|
| DHCP Mode | Enabled |
|
| IP Address | 192.168.0.239 |
|
| Subnet Mask | 255.255.255.0 |
|
| Gateway Address | 192.168.0.254 |
| Maintenance |
|
|
|
|
|
|
|
| Change Password | All fields blank |
|
|
|
|
|
| Device Reboot | Unchecked |
|
|
|
|
|
| Factory Default | Unchecked |
|
|
|
|
|
| Firmware Upgrade | Filename blank |
| Monitoring |
|
|
|
|
|
|
|
| Port Statistics | 0 |
|
|
|
|
|
| Mirroring | Disabled |
|
|
|
|
|
| Cable Tester | OK or No Cable for each port |
|
|
|
|
| MultiCast |
|
|
|
|
|
|
|
| IGMP Snooping Status | Enabled |
|
| VLAN ID Enabled for IGMP | 1 (not configurable until VLAN is enabled) |
|
| Snooping |
|
|
| Validate IGMPv3 IP header | Disabled |
|
| Block Unknown Multicast | Enabled |
|
| Address |
|
|
| IGMP Snooping Static Router | N/A (blank) |
|
| Port (GS105E only) |
|
|
|
|
|
Supplemental Information
34