NETGEAR JGS524E-100NAS manual QoS Global Configuration Default Settings

ProSafe Plus Switch Utility

All the QoS features have default settings. It is not necessary to configure any settings to use the ProSafe Plus switches. The following table lists the default settings.

Table 2. QoS Global Configuration Default Settings

Feature	Setting
QoS Mode	802.1p Based
Port Priority	Low priority for each port
Rate Limit
Ingress	No limit
Egress	No limit
Broadcast Filtering	Disabled

QoS Global Configuration

Global configuration allows you to assign priorities for how the switch transmits data. Priority can be assigned either by port number (Port Based) or by the type of data being transmitted (802.1p based). You would typically want to assign a low priority for normal classes of data (email, internet browsing, and ordinary data transfers) and high priority to video, voice, and other delay sensitive data.

Port Based Priority

Port-based priority works by assigning a priority to all data passing through a particular port. A higher priority transmits data with a minimum of delays. If packets arrive at several ports at the same time, the ports configured as higher priority transmit their packets first. You must determine which ports are going to carry delay sensitive data.

Quality of Service

26