NETGEAR JGS524E-100NAS manual Utility Features Overview

Page 8

ProSafe Plus Switch Utility

The discovered switches are displayed as shown.

You can now select a switch to configure or display its status.

Note: To select a switch, the computer that you are using has to be on the same subnet as the switch. If you are using a standalone computer that is not on a network, you must change your computer’s subnet before you can access the switch.

You can select a language for the utility user interface. In the Select Language drop-down list, select a language. You are asked to restart the utility to enable the selected language.

Utility Features Overview

The utility configures switch features and provides status and support information. The features are arranged on tabs.

Getting Started

8

Image 8

Contents ProSafe Plus Switch Utility Revision History Technical SupportStatement of Conditions Contents Quality of Service Install the ProSafe Plus Switch Utility Getting Started To install the utility Registration Pop-Up Window Discovering SwitchesClick Install Utility Utility Features Overview System General Configuration and Information QoS Quality of ServiceSwitch Settings Vlan Virtual LAN networksUninstall the Utility  To uninstall the utilitySystem Configuration System FeaturesSystem Configuration Status Switch Selection To select a switch  To enable Dhcp operation Switch InformationDhcp Mode Selection Maintenance Change PasswordDevice Reboot Set the IP Address InformationReset Factory Defaults Firmware UpgradeMonitoring Port Statistics To have a switch port see the data on another port Enable MirroringPort Mirroring Cable TestMultiCast Igmp SnoopingStatic LAG Link Aggregation Group for JGS524E Only Virtual LAN Configuration Vlan OverviewPort-Based Configuration Basic Port Based Vlan ConfigurationAdvanced Port Based Vlan Configuration  To assign members of a Vlan group802.1Q Based Configuration Basic 802.1Q Vlan ConfigurationAdvanced 802.1Q Vlan Configuration Vlan ConfigurationVlan Membership Port PvidPort Tagging  To add ports to a Vlan groupSelect UnTag Tagging Control  To tag data from ports To untag data from ports Quality of Service QoS OverviewQoS Global Configuration QoS Global Configuration Default Settings To assign Port Based priorities Broadcast Filtering  To configure Rate LimitingRate Limiting  To configure Broadcast Filtering Help Online HelpSupport Information About the UtilityUser Guide Click Register Registration To register your product Supplemental Information Default Settings Default Switch SettingsProSafe Plus Switch Utility Default Switch Settings Index Product Name & Model