NETGEAR manual Physical Description, GS752TXS Front-Panel and Back-Panel Configuration

2. Physical Description 2

This chapter describes the GS752TXS Smart Switch hardware features. Topics include:

•GS752TXS Front-Panel and Back-Panel Configuration

•LED Designations

•Device Hardware Interfaces

GS752TXS Front-Panel and Back-Panel Configuration

The GS752TXS Smart Switch has 48 10/100/1000 Mbps copper ports and four dedicated 1000 Mbps/10Gbps SFP+ fiber ports. Up to two fiber ports (port 51 and 52) at a time can be used as stacking ports.

Each port is capable of sensing the line speed and negotiating the duplex mode with the link partner automatically.

Figure 2 illustrates the front panel of the NETGEAR GS752TXS Smart Switch.

Power, Fan, and
Stack Master LEDs		Link/Speed/ACT LEDs	1000M/10G
	Stack ID LED		SFP Ports

	Power		Link/Act Mode — 1	2	3	4	5	6	7	8	9	10	11	12	13	14	15	16	17	18	19	20	21	22	23	24	25	26	27	28	29	30	31	32	33	34	35	36
	Fan		Green=Link at 1G
			Yellow=Link at 10/
	Stack		100M
	Master	ID
Reset		Factory
		Defaults

														GS752TXS
37	38	39	40	41	42	43	44	45	46	47	48	49F	50F	51F	52F
															SFP
															+
													Green=10G Link Yellow=1G
														Blink=ACT

Factory
	10/100/1000 Ethernet Ports
Defaults Button
Reset Button

Figure 2. Front Panel

The front panel contains the following:

•48 RJ-45 connectors for 10/100/1000 Mbps autosensing Gigabit Ethernet switching ports

Chapter 2. Physical Description 12