NETGEAR GS752TXS manual Checking the Installation, Connecting Devices to the Switch

GS752TXS Smart Switch Hardware Installation Guide

4.Align the mounting holes in the brackets with the holes in the rack, and insert two pan-head screws with nylon washers through each bracket and into the rack.

5.Tighten the screws with a #2 Phillips screwdriver to secure mounting brackets to the rack.

Figure 6. Rack Mount

Step 3: Checking the Installation

Before applying power to the switch, perform the following steps:

•Inspect the equipment thoroughly.

•Verify that all cables are installed correctly.

•Check cable routing to make sure cables are not damaged or creating a safety hazard.

•Ensure all equipment is mounted properly and securely.

Step 4: Connecting Devices to the Switch

The following procedure describes how to connect PCs to the switch’s RJ-45 ports. The GS752TXS Smart Switch contains Auto Uplink technology, which allows the attaching of devices using either straight-through or crossover cables.

22 Chapter 4. Installation