NetComm 3G9W manual Diagnostics, Test Description

8.1Diagnostics

The Diagnostics menu provides feedback on the connection status of the device. The individual tests are listed below. If a test displays a fail status:

1:Click on the Help link

2:Now click Re-run Diagnostic Tests at the bottom of the screen to re-test and confirm the error

3:If the test continues to fail, follow the troubleshooting procedures in the Help screen.

Test	Description
ENET Connection	Pass: Indicates that the Ethernet interface from your computer is connected to the
	LAN port of this Router.
	Fail: Indicates that the Router does not detect the Ethernet interface on your
	computer.
Wireless connection	Pass: Indicates that the wireless card is ON.
	Down: Indicates that the wireless card is OFF.
Ping Default Gateway	Pass: Indicates that the Router can communicate with the first entry point to the
	network. It is usually the IP address of the ISP’s local Gateway.
	Fail: Indicates that the Router was unable to communicate with the first entry point
	on the network, and it may not have an effect on your Internet connectivity. If this test
	fails and you can access the Internet, there is no need to troubleshoot this issue.
Ping Primary Domain	Pass: Indicates that the Router can communicate with the primary Domain Name
Name Server	Server (DNS).
	Fail: Indicates that the Router was unable to communicate with the primary Domain
	Name Server (DNS). It may not have an effect on your Internet connectivity. Therefore
	if this test fails but you are still able to access the Internet, there is no need to
	troubleshoot this issue.

60 – YML902