NetComm 3G9W manual End the telnet session, Reset/reboot device, Radio Signal Strength

Page 72

End the telnet session

Description: End the telnet session

Synopsis: logout Example:

> logout

Reset/reboot device

Description: To reboot the router.

Synopsis: reboot Example:

> reboot

Radio Signal Strength

Description: Display the 3G radio signal strength.

Synopsis: sierra show --signal Example:

> sierra show --signal signal: 23

Note: Signal value is explain in the table below

Value		2 ~ 5	6 ~ 10	11 ~ 13	14 ~ 17	18 ~ 31	99

Signal level		-109 ~ -103	-101 ~ -93	-91 ~ -87	-85 ~ -79	-77 ~ -52	unknown
in dBm



5 Signal bars

LED

Low

Medium

High

72 – YML902

Image 72

Contents 3G9W Hspa 7.2 Mbps Wi-Fi Router Important Notice and Safety Precaution PrefaceTable of Contents Appendix a Command Line Interface CLI Commands Via Telnet Introduction Introduction Features Package ContentsLED Indicators Color Mode DescriptionGreen Power on Off Power off LAN 1~4 Powered offRear panel contains the ports for data and power connections Rear PanelQuick Setup Quick Setup Setup ProcedureConfigure the router through the Web User Interface WUI Save the router configuration and reboot see sectionWeb User Interface Default Settings Web User InterfaceTCP/IP Settings Dhcp ModeClick OK to submit the settings Login Procedure To login to the web interface, follow the steps belowWeb User Interface Homepage Basic / HomeFollowing table provides further details Fields Description3G Settings 3G Settings 3G Service SetupThis menu includes 3G service Setup and PIN Configuration 21 for instruction on how to fix this PIN Configuration PIN Code ProtectionPIN Lock Off YML902 PIN Code Change Wireless Wireless Setup Option DescriptionClick Save/Apply to configure the wireless security options SecurityCard. If the Ssid does not match, access is denied AuthenticationWEP Encryption will also be enabled Select SsidConfiguration Broadcast and multicast messages. The default is Default is disabledAP Isolation Point can be linked54g Mode 802.11b only modeMbit/s Dsss specification as described in Ieee Std 54g ProtectionDeny Rejects access for the specified MAC addresses MAC FilterMAC Address Can be addedWireless Bridge Click Save/Apply to implement new configuration settingsFeature Options Authorized Lists those devices with authorized access Station InfoIs generated randomly AssociatedManagement Device Settings ManagementUpdate Settings Restore DefaultDefault screen upon successful installation Access Control YML902 Simple Network Time Protocol Sntp Save and Reboot Advanced Setup Advanced Setup This chapter explains advanced setup for your RouterConfiguration Protocol Local Area Network LANIgmp Snooping No client subscribes to a multicast groupNetwork Address Translation NAT Port ForwardingIs selected the port ranges are automatically configured Selected the port ranges are automatically configuredOptions Description External Port EndPort Triggering Demilitarized DMZ Host Trigger Port EndTrigger Protocol TCP, TCP/UDP or UDP Open Port Start Open Port EndSecurity Options Description Parental Control User Name User-defined label for this restrictionMAC address of the PC running the browser Routing YML902 YML902 DNS Server Configuration Domain Name Servers DNSDynamic DNS Options DescriptionsStatus Status Diagnostics Test DescriptionSystem Log Click View System Log. The results are displayed as follows 3G Status Status Description Status BCS Battery Charge Level StatusQuality Ec/Io Strongest cells Network RegistrationStatistics Interface Shows connection interfacesService Shows the service type Route Select Route to display the paths the Router has foundField Description But may be needed by routing daemons Dynamic Host Configuration Protocol Dhcp ARP Click ARP to display the ARP information Click Dhcp to display the Dhcp informationCLI commands Via Telnet CLI commands via Telnet Show all CLI commandsReset/reboot device Radio Signal StrengthEnd the telnet session Radio Band Connection statusWireless LAN mode set and read Imsi & Imei readConfigure basic Wireless LAN features OptionsMeans auto select channel. Default value YML902 Example Configure wireless LAN security Valid value string of 79 characters Valid value string of 8 ~ 63 characters Configure wireless LAN MAC filter Wlan macfilter --mode disabledallowdeny --add MACaddressConfigure Wireless Bridge Wireless Distribution System/WDS Description configure the wireless bridge SynopsisDescription set remote bridge MAC address Rmac2 MACaddressShow wireless LAN interface configurations Options --configBasic AdvanceWlan security wpaGTKRekey = Contact Information Email support@netcomm.com.au