Chapter 3 - Getting Started with RASExpress
iii.Select ISI Setup.
iv.Delete all ISI cards before saving and rebooting the server.
These steps correct the initial subnet error the next time the server loads.
If you set the Remote Client IP Address to any of these values (Use DHCP, or Use Address Pool, Use Radius), go to step A15. If you selected Use Address Pool, you must configure the address pool. See the RASExpress User Guide.
A15. When the above steps are complete, press Esc and save the changes to disk. You will be asked to
A16. Type Y and press Enter. The connection closes while the RASExpress server
A17. To complete the configuration of the RASExpress server, select Configuration of server
from the main menu. For detailed information about the menu options, see Chapter 3 of the RASExpress manual.
CommPlete 4000 Communications Server User Guide | 15 |