MRV Communications EM316E3 manual Hardware Installation Preparation, Follow all Safety Regulations

Page 11

Fiber Driver

EM316E3 & EM316E3SF

2 HARDWARE INSTALLATION

PREPARATION

STEP 1 Follow all Safety Regulations

1Eliminate static electricity in the workplace by grounding operators, equipment, and devices (components and computer boards). Grounding prevents static charge buildup and electrostatic potential differences. Transporting products in special electrostatic shielding packages avert electrical field damage.

2An effective workplace should be outfitted with the following items:

a)ESD protective clothing/smocks: Street clothing must not come in contact with components or computer boards since the various materials in clothing can generate high static charges. ESD protective smocks, manufactured with conductive fibers, are recommended.

b)Electrostatic shielding containers or totes: These containers (bags, boxes, etc.) are made of specially formulated materials, which protect sensitive devices during transport and storage.

c)Antistatic or dissipative carriers: These provide ESD protection during component movement in the manufacturing process. It must be noted that antistatic materials alone will not provide complete protection. They must be used in conjunction with other methods such as totes or electrostatic shielding bags.

d)Dissipative tablemat: The mat should provide a controlled discharge of static voltages and must be grounded. The surface resistance is designed such that sliding a computer board or component across its surface will not generate more than 100 V.

e)Personal grounding: A wrist strap or ESD cuff is kept in constant contact with bare skin and has a cable for attaching it to the ESD ground. The purpose of the wrist strap is to drain off the operator’s static charge. The wrist strap cord has a current-limiting resistor for personnel safety. Wrist straps must be tested frequently to ensure that they are undamaged and operating correctly. When a wrist strap is impractical, special heel straps or shoes can be used. These items are effective only when used in conjunction with a dissipative floor.

P/N: 1226006-001, REV_L

PAGE 11

Image 11
Contents EM316E3SF What network medium/media does your organization use ? How many employees work at installation site?Registration Card Serial numberEM316E3SF Fiber Driver EM316E3 & EM316E3SF Product Description IntroductionConnectivity FeaturesRequirements for Managed Module Fiber Optic Display Information LED DefinitionTypical Applications Jumper Settings Factory Default ConfigurationE3 Line Receiver to fiber optic Transmitter Theory of OperationSwitch LPBK/NORM is set to OFF Follow all Safety Regulations Hardware Installation PreparationUnpacking the unit Determine the best location for the chassisTake out the required amount of blank panels Unit InstallationFiber Driver EM316E3 & EM316E3SF Troubleshooting Technical Specifications International Support Customer SupportAmericas Support Fiber Driver Division of MRV GlossaryOrdering Information Fiber Driver EM316E3 & EM316E3SF