7 Locatethebevelindicatorand10-32x 3/8"long
panheadscrewinloosepartsbag,
8 Usea #2phillipsscrewdriverto attachthe bevel
indicatorto the backof the frame, in the small
recessbelowthetrunnion,with the 10-32x 3/8"
screw
9 Alignthebevelindicatorwiththe"0"degreemark
onthetrunnionandtightenthescrew
INSTALLING THE HOSE CLIP
! Locate the Hose Clip in the loose parts bag
Identify the barbs on the clip
,I,I ,.dlc o.
....iiul,ll,,i,Ul ,i,
Barbs
2, Open the front cover of the saw by pulling forward
on the finger hold located on the left side of the
band saw, Locate the notch in the Frame at the
sawdust ejection port
Notch
3 Position the Hose Clip with the barbs to the back
side of the band saw Slide the Hose Clip into the
notch Push the clip until it is fully seated on the
Frame The Hose Clip will secure a Wet/Dry vac
hose in place for sawdust collection,
Hose Clip
13