Multi-Tech Systems MT9234ZBA-V manual Direct Connection, Callback Security Commands

Page 19

Chapter 5 – Callback Security

Direct Connection

Use this procedure when you want to connect without first being called back. The password that you use must be set up for an optional direct connection.

1.Using a data communications program such as HyperTerminal, dial the number of the callback modem.

2.When the connection is established, the callback modem responds with the following message:

Password>

3.Type a direct connection password, press the - key, and then press ENTER. You have three attempts or one minute to enter a valid password.

4.If the password is valid, the following message appears and the modems establish a working connection:

OK Connecting

Note: You can make all calls direct connect regardless of whether the password or phone number has the - character by using the %H1 command

Callback Security Commands

The AT Commands related to Callback Security are included in the AT Commands Reference guide included on MT9234ZBA-Series product CD.

 

 

 

Multi-Tech Systems, Inc. MT9234ZBA-Series User Guide (S000387A)

19

Page 18 Page 20
Image 19
Page 18 Page 20
Contents MultiModem ZBA Revisions Table of Contents Table of Contents Introduction FeaturesTechnical Specifications Diagnostics Opening the Modem InstallationSafety Warnings Change the Internal JumpersChanging the Voice Jumper Connect the Modem to Your PC Install the Modem Driver Using AT Commands to Configure Your Modem Leased-Line Operation SetupOperation About the Front PanelConnecting to the Internet Changing the Setup Password Remote ConfigurationBasic Procedure SetupCallback Security Changing the Setup PasswordTurning Callback Security On and Off Password-Only Callback Setting Callback Security Message ParityAssigning Callback Passwords and Phone Numbers Calling ProceduresExtension-Entry Callback Number-Entry CallbackDirect Connection Callback Security CommandsCallback Assignments Form None of the Indicators Light TroubleshootingModem Does Not Respond to Commands Modem Cannot Connect When Dialing Page Fax and Data Software Can’t Run at the Same Time Data Is Being LostThere Are Garbage Characters on the Monitor Modem Doesn’t Work with Caller IDMulti-Tech Warranty Statement Warranty, Service, and Technical SupportRepair Procedures for U.S. and Canadian Customers Replacement Parts Repair Procedures for International DistributorsIdentify the Modem Firmware Upgrade OverviewDownload the Upgrade File Appendix a Upgrading the Modem’s FirmwareClear Your Stored Parameters Extract the Upgrade FilesUpgrade the Modem’s Firmware Restore Your ParametersFCC Part 68 Telecom FCC Part 15 RegulationIndustry Canada EMC, Safety and R&TTE Directive ComplianceFax Branding Statement Canadian Limitations NoticeNew Zealand Telecom Warning Notice International Modem RestrictionsSouth African Statement Weee Waste Electrical and Electronic Equipment Statement Appendix C Waste Electrical and Electronic EquipmentSetup Appendix D Installing a Modem under LinuxConnecting to a Cisco Router Console Port Appendix E Connecting to a Cisco RouterConsole Port Connections Remote Configuration依照中国标准的有毒有害物质信息 Appendix F C-ROHS HT/TS Substance ConcentrationIndex AT commandsTelephone
Related manuals
Manual 35 pages 52.39 Kb Manual 35 pages 61.01 Kb

MT9234ZBA-V, MT9234ZBA specifications

Multi-Tech Systems has long been a trusted name in the field of communication technology, and its MT9234ZBA and MT9234ZBA-V modem products exemplify the company's commitment to delivering robust and reliable connectivity solutions. These modems are ideal for a range of applications, including telephony, data communication, and remote monitoring, making them a versatile choice for both personal and professional use.

One of the standout features of the MT9234ZBA and MT9234ZBA-V is their high-speed data transmission capabilities. Both models support data rates of up to 56 Kbps, ensuring efficient and swift data transfer for various applications. This allows users to experience minimal latency during downloads and uploads, appealing to those who depend on timely and reliable data delivery.

These modems utilize advanced technologies, such as V.92 and V.90 protocols, which enable users to benefit from features like quick connect, thereby reducing the time it takes to establish a connection. Additionally, the modems support both analog and digital lines, making them adaptable for different environments and infrastructures.

Another notable characteristic of the MT9234ZBA and MT9234ZBA-V modems is their compatibility with a wide range of operating systems, including various versions of Windows, Linux, and Mac OS. This cross-platform support ensures that users can easily integrate these modems into their existing software environments without encountering significant compatibility issues.

The design and construction of these modems are also worth mentioning. They are compact and lightweight, making them easy to install and reposition as needed. Their robust construction ensures longevity, which is crucial for users in environments where durability is paramount.

For those concerned about security, Multi-Tech Systems has integrated multiple security features within these modems. This includes support for encryption protocols, ensuring that data transmitted over the modem remains secure and protected from unauthorized access.

In conclusion, the MT9234ZBA and MT9234ZBA-V by Multi-Tech Systems represent an excellent choice for anyone in need of reliable and high-speed modem solutions. With their advanced features, compatibility with various operating systems, and emphasis on security, these modems stand out in the crowded telecommunications market. Whether for home use or in a professional setting, the MT9234ZBA and MT9234ZBA-V offer robust solutions for modern communication needs.
Top Page Image Contents