Multi-Tech Systems MT9234ZBA manual Appendix a Upgrading the Modem’s Firmware, Upgrade Overview

Page 27

Appendix A – Upgrading the Modem’s Firmware

Appendix A – Upgrading the Modem’s Firmware

Your modem is controlled by semi-permanent software, called firmware, which is stored in flash memory. Firmware is nonvolatile; that is, it remains stored in memory when the modem is turned off. However, it can be changed by either the manufacturer or the user as bugs are fixed or new features are added.

Since the firmware in your modem is stored in flash memory, you can upgrade it yourself in a few minutes by using the following procedures.

Upgrade Overview

The upgrade procedure consists of the following steps, which are described in greater detail in the following sections.

1.Identify the model number and firmware version of your modem.

2.Identify the current version of the firmware (you can view this on the Multi-Tech Web site). If your modem already has the current firmware, there is no need to update it.

3.Download the upgrade file and the appropriate Flash Wizard for your modem.

4.Install the Flash Wizard and extract the firmware .HEX file from the file you downloaded.

5.Document and clear your stored parameters.

6.Upgrade the modem’s firmware using the .HEX file and the Flash Wizard.

7.Restore your parameters.

Step 1: Identify the Modem Firmware

You must know the model number and firmware version of your Multi-Tech modem to know whether or not you should update it.

1.Run your favorite terminal program. If you are using Windows 95 or above, you can use Windows HyperTerminal.

2.In the program’s terminal window, type AT&F. Even if you cannot see the AT&F command on your screen, be sure to type it completely, and then press ENTER. If the modem does not respond with OK, repeat the AT&F command.

3.Now type ATI, press ENTER, and record your results. The model number and firmware version should appear similar to that shown below.

LT V.92 1.0 MT9234ZBA-V-V92 Serial Voice/Data/Fax Modem Version 1.25k

Step 2: Identify the Current Firmware Version

Identify the current version of the firmware at the Multi-Tech Web site. If your modem already has the current firmware, there is no need to update it.

1.Using your favorite Web browser, go to http://www.multitech.com/SUPPORT/MultiModem ZBA/firmware.asp.

2.Scroll down to your modem model number.

3.Look at the firmware version number for your modem.

4.If the firmware version number matches the firmware version number found in “Step 1: Identify the Modem Firmware,” you have the current firmware version and do not need to be update.

5.If the firmware version number is greater than the firmware version number found in “Step 1: Identify the Modem

Firmware,” your modem has an older firmware version. Continue with “Step 3: Download the Upgrade File.”

Warning: The first digit of the new firmware must match the first digit of the old firmware, or the modem may not work properly; e.g., if your current firmware version is 4.16, replace it only with 4.xx firmware, not 6.xx firmware.

Step 3: Download the Upgrade File

1.If you are not already at the MultiModem ZBA Firmware page of the Multi-Tech Web site, follow the procedure in “Step 2: Identify the Current Firmware.”

2.Download the upgrade file for your modem by clicking its name, and save the file in a temporary folder on your hard disk.

3.In the same section of the Web page, click the Flash Wizard utility for your operating system to download it, and save it in the same folder.

 

 

 

Multi-Tech Systems, Inc. MT9234ZBA-Series User Guide (S000387A)

27

Page 26 Page 28
Image 27
Page 26 Page 28
Contents MultiModem ZBA Revisions Table of Contents Table of Contents Introduction FeaturesTechnical Specifications Diagnostics Opening the Modem InstallationSafety Warnings Change the Internal JumpersChanging the Voice Jumper Connect the Modem to Your PC Install the Modem Driver Using AT Commands to Configure Your Modem Leased-Line Operation SetupOperation About the Front PanelConnecting to the Internet Changing the Setup Password Remote ConfigurationBasic Procedure SetupChanging the Setup Password Callback SecurityTurning Callback Security On and Off Password-Only Callback Setting Callback Security Message ParityAssigning Callback Passwords and Phone Numbers Calling ProceduresExtension-Entry Callback Number-Entry CallbackDirect Connection Callback Security CommandsCallback Assignments Form Troubleshooting None of the Indicators LightModem Does Not Respond to Commands Modem Cannot Connect When Dialing Page Fax and Data Software Can’t Run at the Same Time Data Is Being LostThere Are Garbage Characters on the Monitor Modem Doesn’t Work with Caller IDWarranty, Service, and Technical Support Multi-Tech Warranty StatementRepair Procedures for U.S. and Canadian Customers Replacement Parts Repair Procedures for International DistributorsIdentify the Modem Firmware Upgrade OverviewDownload the Upgrade File Appendix a Upgrading the Modem’s FirmwareClear Your Stored Parameters Extract the Upgrade FilesUpgrade the Modem’s Firmware Restore Your ParametersFCC Part 68 Telecom FCC Part 15 RegulationIndustry Canada EMC, Safety and R&TTE Directive ComplianceFax Branding Statement Canadian Limitations NoticeInternational Modem Restrictions New Zealand Telecom Warning NoticeSouth African Statement Weee Waste Electrical and Electronic Equipment Statement Appendix C Waste Electrical and Electronic EquipmentSetup Appendix D Installing a Modem under LinuxConnecting to a Cisco Router Console Port Appendix E Connecting to a Cisco RouterConsole Port Connections Remote Configuration依照中国标准的有毒有害物质信息 Appendix F C-ROHS HT/TS Substance ConcentrationIndex AT commandsTelephone
Related manuals
Manual 35 pages 52.39 Kb Manual 35 pages 61.01 Kb

MT9234ZBA-V, MT9234ZBA specifications

Multi-Tech Systems has long been a trusted name in the field of communication technology, and its MT9234ZBA and MT9234ZBA-V modem products exemplify the company's commitment to delivering robust and reliable connectivity solutions. These modems are ideal for a range of applications, including telephony, data communication, and remote monitoring, making them a versatile choice for both personal and professional use.

One of the standout features of the MT9234ZBA and MT9234ZBA-V is their high-speed data transmission capabilities. Both models support data rates of up to 56 Kbps, ensuring efficient and swift data transfer for various applications. This allows users to experience minimal latency during downloads and uploads, appealing to those who depend on timely and reliable data delivery.

These modems utilize advanced technologies, such as V.92 and V.90 protocols, which enable users to benefit from features like quick connect, thereby reducing the time it takes to establish a connection. Additionally, the modems support both analog and digital lines, making them adaptable for different environments and infrastructures.

Another notable characteristic of the MT9234ZBA and MT9234ZBA-V modems is their compatibility with a wide range of operating systems, including various versions of Windows, Linux, and Mac OS. This cross-platform support ensures that users can easily integrate these modems into their existing software environments without encountering significant compatibility issues.

The design and construction of these modems are also worth mentioning. They are compact and lightweight, making them easy to install and reposition as needed. Their robust construction ensures longevity, which is crucial for users in environments where durability is paramount.

For those concerned about security, Multi-Tech Systems has integrated multiple security features within these modems. This includes support for encryption protocols, ensuring that data transmitted over the modem remains secure and protected from unauthorized access.

In conclusion, the MT9234ZBA and MT9234ZBA-V by Multi-Tech Systems represent an excellent choice for anyone in need of reliable and high-speed modem solutions. With their advanced features, compatibility with various operating systems, and emphasis on security, these modems stand out in the crowded telecommunications market. Whether for home use or in a professional setting, the MT9234ZBA and MT9234ZBA-V offer robust solutions for modern communication needs.
Top Page Image Contents