MultiFRAD
Front Panel Description
The front panel of the MultiFRAD contains groups of LEDs that provide the information on the composite link activity, LAN, data channels, and Voice/Fax channel activity, and the general status of the MultiFRAD.
|
|
|
|
| Voice/Fax Channel 8 |
| Voice/Fax Channel 7 |
| Voice/Fax Channel 6 |
|
|
| Voice/Fax Channel 5 |
| ||||||||||||||
|
|
|
| FXS FXO | E&M | FAX | XMT | RCV | XSG | RSG | FXS FXO E&M FAX XMT RCV XSG RSG | FXS FXO E&M FAX XMT RCV XSG | RSG | FXS | FXO | E&M | FAX | XMT | RCV | XSG | RSG | |||||||
|
|
| Voice/Fax Channel 4 |
| Voice/Fax Channel 3 |
| Voice/Fax Channel 2 |
|
|
| Voice/Fax Channel 1 |
| ||||||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| ||
|
|
|
| FXS | FXO | E&M | FAX | XMT | RCV | XSG | RSG | FXS FXO E&M | FAX | XMT RCV | XSG RSG | FXS | FXO E&M | FAX XMT | RCV XSG | RSG | FXS | FXO | E&M | FAX | XMT | RCV | XSG | RSG |
Router/Multiport Data/Voice/Fax |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Frame Relay Access Device |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Composite Link |
| Ethernet | Channel 1 |
|
| Channel 2 |
| Channel 3 | Channel 4 | Channel 5 | Channel 6 | Channel 7 | Channel 8 | Channel 9 |
| Channel 10 | |||||||||||
PWR BTG | RCV XMT CD CTS V35 EXT LNK | RCV | XMT COL LNK | V35 XMT RCV |
|
| V35 | XMT | RCV |
| XMT RCV | XMT | RCV | XMT | RCV | XMT | RCV | XMT | RCV | XMT | RCV |
| XMT | RCV |
|
| XMT | RCV |
The LED’s are as follows:
PWR | Power. This indicator lights when the ON/OFF switch is in the ON position. |
BTG | Booting. This indicator lights when the MultiFRAD is booting. It takes approximately 90 |
| seconds to boot. |
Composite Link
RCV | Receive. This indicator blinks when the composite link is receiving data. |
XMT | Transmit. This indicator blinks when the composite link is transmitting data. |
CD | Carrier Detect. This indicator lights when the MultiFRAD detects a carrier signal. |
CTS | Clear To Send. This indicator lights when the composite link device is ready to |
| transmit data. |
V35 | V.35 Interface. This indicator lights when the composite link is configured for a V.35 |
| interface. |
EXT | External Link. This indicator lights when the MultiFRAD is configured for an external |
| composite device. |
LNK | Link. This indicator lights solid when all DLCIs detected become active; flashes fast |
| when at least one DLCI is active and others are inactive; flashes slow when |
| communication with the local frame relay switch has occurred; and off when no frame |
| relay communication has been received. |
Ethernet
RCV | Receive. This indicator blinks when packets are being received from the local area |
| network. |
XMT | Transmit. This indicator blinks when packets are being transmitted to the local area |
| network. |
COL | Collision. This indicator lights when a collision is in progress; that is, when two nodes |
| are transmitting packets at the same time. |
LNK | Link. This indicator lights indicating that the MultiFRAD is connected to the local area |
| network. |
8