Multi-Tech Systems FR3100, FR3060 manual Channels 3 through, Voice/Fax Channels 1

Page 9

	Chapter 1 - Introduction and Description

Channels 1 and 2
V35	V.35 Interface. This indicator lights when the channel is configured for a V.35 interface.
XMT	Transmit. This indicator blinks when the channel is receiving data to be transmitted on
	the link or over IP.
RCV	Receive. This indicator blinks when the channel is transmitting data received from the
	link.
Channels 3 through 10
XMT	Transmit. This indicator blinks when the channel is receiving data to be transmitted on
	the link or over IP.
RCV	Receive. This indicator blinks when the channel is transmitting data received from the
	link.
Voice/Fax Channels 1 - 8
FXS	Foreign Exchange Station. This indicator lights when the voice/fax channel is
	configured for FXS operation.
FXO	Foreign Exchange Office. This indicator lights when the voice/fax channel is configured
	for FXO operation.
E&M	Ear & Mouth Operation. This indicator lights when the voice/fax channel is configured
	for E&M operation.
FAX	Fax. This indicator lights when there is fax traffic on the voice/fax channel.
XMT	Transmit. This indicator lights when voice or fax data is being transmitted.
RCV	Receive. This indicator lights when voice or fax data is being received.
XSG	Transmit Signal. This indicator lights when the FXS-configured channel is off-hook, the
	FXO-configured channel is receiving a ring from the telco, or the M lead is active when
	the voice/fax channel is configured for E&M operation (i.e., the MultiFRAD is receiving a
	ring from the PBX).
RSG	Receive Signal. This indicator lights when the FXS-configured channel is ringing, the
	FXO- configured channel is off-hook, or the E lead is active on the E&M-configured
	channel.

9

Image 9

Contents User Guide Record of Revisions RevisionDescription User GuideContents Appendices Introduction and Description MultiFRAD 3000-Series IntroductionPreview of this Guide Front Panel Description Composite LinkEthernet Channels 1 Channels 3 throughVoice/Fax Channels 1 Frame Ground GND Connector Power ConnectorInternal Composite Link T1 DSU Connector Monitor XMT/RCV ConnectorVoice/Fax Channels 1 8 Connectors Channels 3 10 ConnectorsCommand Port Technical SpecificationsChannel Connectors Voice/Fax Channel ConnectorsInstallation Safety Warnings Unpacking your MultiFRADValid Voice/Fax Channel Connections General Cable Connections Cabling your MultiFRADChannel Cable Connections Voice/Fax Cable Connections Default Jumper Block Positioning ProcedureSoftware Loading and Configuration Loading your Software Software Loading and Configuration MultiFRAD 3000-Series User Guide IP Address Ethernet Mask Frame Type MultiFRAD 3000-Series User Guide Software Loading and Configuration MultiFRAD 3000-Series User Guide Software Loading and Configuration MultiFRAD 3000-Series User Guide Software Loading and Configuration MultiFRAD 3000-Series User Guide Detect and Map Your DLCIs MultiFRAD 3000-Series User Guide Build Your Phone Directory Database MultiFRAD 3000-Series User Guide Click Download Setup MultiFRAD 3000-Series User Guide MultiFRAD Software Before You Begin MultiFRAD Configuration Changing IP Parameters MultiFRAD Software MultiFRAD 3000-Series User Guide Changing IPX Parameters MultiFRAD 3000-Series User Guide MultiFRAD Software Changing Bridging Parameters WAN Port Setup Point to Point Setup Frame Relay Setup MultiFRAD 3000-Series User Guide MultiFRAD Software MultiFRAD 3000-Series User Guide MultiFRAD Software Data Port Configuration Changing Voice/Fax Channel Parameters InterfaceFXS Interface Voice/Fax FXO InterfaceInterface Regional Changing the Phone Directory Database Others Setup Enable Logging of Statistics Statistics IP Statistics STP Spanning Tree Port Statistics IPX Port StatisticsWAN Statistics Snmp StatisticsPPP Statistics Data Port Statistics Frame Relay Statistics MultiFRAD 3000-Series User Guide Remote Configuration and Management Modem-Based Remote ConfigurationRemote Configuration and Management LAN-Based Warranty, Service and Tech Support Telnet Remote ManagementMultiFRAD Management Menu MultiFRAD ConfigurationRemote User Database WEB Browser ManagementRemote Configuration and Management MultiFRAD 3000-Series User Guide Warranty, Service and Tech Support On-line Warranty Registration Limited WarrantyTech Support Recording MultiFRAD InformationContacting Tech Support via E-mail Multi-Tech BBS ServiceTo log on to the Multi-Tech BBS To Download a fileIf you don’t know the file name About the InternetMultiFRAD 3000-Series User Guide Appendices LAN Cables Appendix a Cabling Diagrams Command Port CableVoice/Fax Channel Connectors RS232C/V.24 * Link Cable Trunk CableCommand Port Remote Configuration CableAppendix B Regulatory Information Glossary MultiFRAD 3000-Series User Guide Glossary MultiFRAD 3000-Series User Guide Glossary MultiFRAD 3000-Series User Guide Glossary MultiFRAD 3000-Series User Guide Glossary 100 101 102 103 Index Remote Configuration

Related manuals

Manual 105 pages 51.71 Kb