Multi-Tech Systems MT5634ZLXE-T, MT5634ZLX 2 manual Remote digital loopback test, in normal mode

MultiMobile User Guide

&T6	Remote digital loopback test, in normal mode
&V	View active file and stored phone numbers
&W	Store active configuration into the modem’s NVRAM
&Zn=x	Store telephone number (n=0 to 3; x=<string>) (see also the dial modifier in ”ATDn”
	command). The max. number of digits per string is 40.

Extended “AT\” (Back Slash) Command Set (* indicates factory default setting)

Command	Function
\Jn	Constant DTE speed option
\J0 *	DCE and DTE rates are independent
\J1	Force the DTE interface speed to the DCE connection rate (line speed) after on-line
\Nn	Error control mode options
\N0	Buffered mode, no error control (flow control is allowed).
\N1	Direct mode, no error control (no flow control is allowed).
\N2	MNP reliable mode. If MNP 2-4 error control establishment fails, the modem
	disconnects.
\N3 *	V.42, MNP or buffer mode. The modem attempts to connect in V.42 mode. If this
	fails, the modem attempts to connect in MNP mode. If this fails, the modem connects
	in buffer mode.
\N4	V.42 or disconnect. The modem attempts to connect in V.42 mode. If this fails, the
	call will be disconnected.
\Qn	Local flow control options
\Q0	Disable flow control (same as “AT&K0”)
\Q1	XON/XOFF software flow control (same as “AT&K4”)
\Q3 *	RTS/CTS hardware flow control (same as “AT&K3”)
\Tn	Set inactive timer (for buffer mode only)
	n=0 *	Disable inactive timer
	n=1-255	Enable inactive timer. Length in minutes
\Vn	Protocol result codes
\V0	Disable protocol result code appended to DCE speed.
\V1 *	Enable protocol result code appended to DCE speed.

38 MT5634ZLX/E