Multi-Tech Systems MT5634ZLXE-T, MT5634ZLX 2 manual Windows 95 Installation

Page 17

Chapter 2 - Quick Start

Windows 95 Installation

1.Turn on your computer.

2.Insert the MT5634ZLX/E card into an open PCMCIA slot and make sure it is firmly seated.

3.Ensure that the 15-pin connector end of the MT5634ZLX/E Modem 10Base-T Combination cable is plugged into the center opening on the PCMCIA card.

4.Windows briefly displays the New Hardware Found dialog box and then the Update Device Driver Wizard is displayed.

Insert the MT5634ZLX/E Driver disk and click Next >.

5. The Update Device Driver Wizard is displayed indicating it has located the driver.

Click Finish.

6.The Copying Files screen is displayed. Once the files have been copied to the system, the screen disappears.

7.Remove the driver disk from the floppy drive.

8.To complete the installation, reboot the computer.

MT5634ZLX/E

17

Image 17

Contents User Guide Models MT5634ZLX/E and MT5634ZLX/E-T/2Revision Description User GuideContents Index EMC, Safety and Terminal Directive ComplianceIntroduction and Description MultiMobile User Guide IntroductionProduct Description Technical Specifications Features System Requirements MultiMobile User Guide Quick Start Unpacking Safety Warning TelecomMT5634ZLX/E Installation Windows 98 Installation Installing Driver and Modem SoftwareQuick Start MT5634ZLX/E Windows 95 Installation Click My Computer Control Panel and double-clickModems Pre-installation Instructions Windows NT 4.0 InstallationMT5634ZLX/E Installation in NT Open My Computer Control Panel NetworkMT5634ZLX/E Modem configuration for NT Click Have Disk Quick Start MT5634ZLX/E Windows NT 3.51 Installation · TCP/IP For Non-Windows 95/98/NT Systems Artisoft Lantastic 6.0 InstallationNovell NetWare Installation PROTOCOL.INI MS LAN Manager InstallationSelect Enhanced mode NDIS3 for.... then click OK Packet Driver InstallationWindows for Workgroups 3.11 Installation Basic Modem Operation Understanding AT CommandsUsing Windows 95/98/NT HyperTerminal Program Dialing and Answering Techniques MT5634ZLX/E AT Commands, S-Registers and Result Codes AT&K3H0Enter How To Use AT CommandsAT Commands, S-Registers, and Result Codes Basic AT Commands Speaker off during dialing and on until carrier present AT Commands, S-Registers, and Result Codes Remote digital loopback test, in normal mode MT5634ZLX/E Terse Verbose Description Result CodesRegisters MT5634ZLX/E MT5634ZLX/E MT5634ZLX/E Remote Configuration Changing the Setup Password Basic ProcedureSetup Changing the Remote Escape Character Remote ConfigurationMT5634ZLX/E Troubleshooting Characters on the Screen Are Doubled Modem Goes Off-Hook and Disables the Telephone LineModem Does Not Auto-Answer the Phone No Text Appears on the Screen When in Command Mode Troubleshooting No Text Appears on the Screen in Data ModeModem Loses the Connection When in Use Communications Software Dials, but FailsConnect Modem Gets Random Errors in Transmitted DataEnabling The MT5634ZLX/E Installing The Win 95 Driver Over SystemSoft CardWorksSelect Properties Select Drivers in Properties Select Use Plug and PlayWindows COM Port and IRQ ConflictsWindows 95/98 Windows NT 3.51 and NTAppendices Industry Canada Appendix a Regulatory ComplianceClass B Statement FCC Part Appendices FCC Part 68 TelecomCanadian Limitations Notice FAX Branding StatementNew Zealand Telecom Warning Notice EMC, Safety and Terminal Directive ComplianceCommission Decision CTR21 Introduction TroubleshootingAppendix B V.90 Support Lmndisnif Drivername LMNDIS$ Appendix C Comprehensive Driver Notes IntroductionNDIS2 Driver for Windows for Workgroups ODI Driver for Workgroups Online Warranty Registration Appendix D Warranty, Service, and Technical SupportLimited Warranty Multi-Tech BBS Technical SupportIf you know the file name If you don’t know the file nameAbout the Internet About the MultiMobile SoftGSM Cellular UpgradeSupplyNet Online Ordering Instructions About Ordering AccessoriesAppendix E Uninstalling in Windows 98/95/NT Index IndexMultiMobileUSB User Guide