Multi-Tech Systems MT5600BLV.90, MT5600BAV.90, MT5600BAV.92 manual Callback Enable/Disable

￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿ Chapter 6 - Callback Security

The following AT commands are used with callback security.

Command: #DBn	Callback Enable/Disable
Values:	n = 0 or 1
Default:	0
Description:	Enables or disables callback security. When callback security is
	enabled, phone number memory locations 0–4, used for quick
	dialing and DTR dialing, become unavailable and are replaced
	by callback security memory locations 1–30. The phone num-
	ber memory locations and their contents are restored when
	callback security is disabled.
#DB0	Disables callback security.
#DB1	Enables callback security.
Command: #CBNy=[-]xStore Callback Number
Values:	y = 01–30
	x = dialing string
Default:	None
Description:	Stores the callback dialing string x in memory location y. The
	dialing string can include the digits 0 through 9 and any of the
	following characters: #, *, comma (,), semicolon (;), W, A, B, C,
	and D. Up to 30 characters can be used. Example:
	AT#CBN01=9,16127853000. If the optional - character precedes
	the dialing string, and the caller appends the same character to
	the password, the caller is connected immediately, and the
	hangup and callback are skipped.
Command: #CBPy=x Store Callback Password
Values:	y = 01–30
	x = password (6–10 characters)
Defaults:	None
Description:	Stores callback security password x in memory location y. The
	password must have 6 to 10 characters.

Note: A direct connect password may not end with a hyphen (-).

Multi-Tech Systems, Inc. MT5600BA/BL Series User Guide 39