Multi-Tech Systems MT2834BL Series, MT2834BA Series manual Configure Data

Chapter 5 - Command Mode

CONFIGURE DATA		&E14	Data Compression Disabled
COMPRESSION		&E15	Data Compression Enabled
CONFIGURE SPEED		$BA0	Speed Conversion On
CONVERSION		$BA1	Speed Conversion Off
		$MB	Set modem speed (e.g.,$MB14400)
		$SB	Set serial port speed (e.g.,$SB57600)
EXECUTE		$H	Help
IMMEDIATE		I	Product Code Inquiry
ACTION		I 9	Windows 95 Autodetect Inquiry (2834 Series only)
COMMANDS		L5	List Current Operating Parameters
		L6	List S-Register Values
		L7	List additional Configuration Parameters
		L8	List On-Line Diagnostics
		H	Off Hook
	+++AT<CR>		Escape Sequence: Entering Command Mode while On-Line
		%E	Escape Sequence Options...Entering Command Mode while On-Line
		A	Force Answer Mode
		O	Exit Command Mode/Go Back On-Line
EXECUTE		%DF	Format Line Probe Display (Graph or Table Format)
LINE		%DP	Enable/Disable Reading Line Probe From DSP during handshake
PROBE		L9	Display of Signal Strength Information
COMMANDS		L10	Display Signal to Noise Ratio (SNR)
		L11	Display of Noise Information
		&RP	Initiates Retrain to Read Line Probe Parameters
READ AND		Sr?	Read Current S-Register Value
ASSIGN		Sr=	Assign S-Register Value
S-REGISTER
VALUES
REMOTE		#CBN	Passwords for Callback Phone Numbers
CONFIGURATION		#DB	Callback Security Enable/Disable
& CALLBACK		#I	Change LOGIN Password
SECURITY	#RCBNxx		Erase Password Linked with Memory Location xx
		#S	Change SETUP Password
TEST MODEM		U	Self-Test Modem (Chapter 8)
		&T	Enable/Disable Digital Loopback Signal
LEASED-LINE		$LL	Leased-Line Handshake
HANDSHAKE
(MT2834BL)

Multi-Tech Systems, Inc. MT2834BA/BL Series User Guide 31