Blaupunkt CM 168 Detachable face, Theft protection, Affixing the detachable face

Page 10

Detachable face

Selecting the audio source

Theft protection

This unit is equipped with a detachable face. A car radio without face is worthless for thieves.

Protect your car radio and detach the face when you leave your car. It is very easy to attach and detach the detachable face.

Note:

Do not pull the detachable face straight out from the chassis, but detach it as illustrat- ed below. Be sure not to drop the panel.

Do not expose the detachable face to di- rect sunlight or other heat sources.

Do not leave it in a humid place.

Detaching the detachable face

If the unit was still in operation, it will turn off now. All current settings remain stored. If a cassette is inserted, it will be kept in the unit.

The radio will turn on automatically when you attach the detachable face again.

Attaching the detachable face

Slide the panel (B) from the left to the guide of the chassis (A). Gently push the left side of the panel against the front of the chassis until it snaps into place.

Use the SRC (source) button to select be- tween radio, cassette and CD or Aux-in mode.

The CD mode is not available unless a CD changer is connected.

The Aux-in mode is available if a changer is not connected. (See DSC programming.)

To select the operating mode:

Press SRC.

Press the REL button to release the con- trol panel. Then pull it off gently as illustrat- ed.

Affixing the detachable face

If you wish to fix the detachable face per- manently to the chassis, screw down the enclosed bolt at the left hand side of the chassis into the hole, see Fig.

10

Image 10
Contents Munich CM Page Display Display fieldContents Quick reference Select track Additional rocker switch functionsSelect CD Repeat track press once brieflyDolby Preset buttons 1 toMTL Pause@ Preset Scan Remote control operationSCA Scan Accessories Traffic safetyInstallation Important notesTheft protection Detachable faceAffixing the detachable face Radio operation Changing the scan time Selecting the automatic tuning sensitivityScanning stations with Radio Scan Naming radio stationsDeleting a radio station name Setting the TimerDeleting radio station names Deleting all of the radio station namesCassette deck operation CD changer operation Selecting a track CD Select-By-NameDeleting CD names Naming CDsDeleting one CD name Clock/Display changes Setting the clockDeleting all CD names Naming an external audio source Turn On Message TOMDSC programming Overview of the DSC factory settings RM onTuner SpecificationsAmplifier CassetteRadio reception Troubleshooting GuideGeneral CD Changer operationError Displays CD ERRK7/VKD 8 622 401