Naming an external audio source

AUX NAME makes it possible to enter a name of up to 8 characters for an external audio source (AUX ON, see DSC Menu). For this, press SRC to select the AUX mode (only possible if AUX ON is set in the DSC menu and CD changer is not connected).

•Press SRC as often as required until AUX appears in the display.

Enter the AUX NAME in the DSC menu.

•Press DSC briefly.

•Press / to select the AUX NAME function

•Press << >> to enter into editing mode.

The adjustable position will flash.

•Press / to select the character you want to enter. Select a dash “_” to leave a blank space.

•Press << >> to select the next posi- tion.

•When you have entered the name completely, press DSC briefly to store the name.

•Press DSC again to quit the DSC menu.

Turn On Message (TOM)

This unit offers you the possibility to enter a turn on message of up to 40 characters. The message will briefly appear in the dis- play each time you turn the unit on.

Proceed as follows: Select the DSC mode.

∙Press DSC.

∙Press / to select TOM.

∙Press << to turn the message off.

∙Press >> two times to select the edit mode.

∙If there is no TOM programmed, dash- es “_” will appear in the display.

∙The cursor will flash at the current po- sition. Press << / >> to move the cur- sor.

∙Press / to select a character. If you want to enter a blank, select the dash “_”.

∙Press DSC to store the message. Press DSC again to quit the DSC mode.

If you want to change the message, select TOM in the DSC mode and overwrite it in the edit mode. If you want to change just a few of the letters, press << / >> to move the cursor to the corresponding position and change that character only.

ENGLISH