Blaupunkt CM 168 operating instructions DSC programming

Page 20

DSC programming

The car radio has been equipped with DSC (Direct Software Control) to allow you to customize certain programmable, basic settings to suit your personal needs and preferences and then store them.

The basic settings for this car radio were made at the factory.

In the following you can find an overview of these settings, so that you can always re- set to them if desired.

If you wish to alter any of the programming,

press DSC.

“MENU /” will temporarily appear in the display.

Use the / buttons of the rocker switch to select the function you wish to change. The display will show you the setting you have selected. Press the << >> buttons of the rocker switch to change the settings and exit the current mode. Confirm the setting you have selected by pressing the DSC button.

LOUDNESS Loudness boosts the bass frequencies at low volume. LOUD 1 - Low boost LOUD 6 - Max. boost

BAS CENT Bass Center Frequency Ad- justment.

Adjusts the mid-range fre- quency to the specific equipment in the vehicle (50 or 100 Hz)

STA NAME Allows you to name up to 30 radio stations based on their frequency.

SENS LO Adjusts seek tuning sensitivity.“LO” stands for local reception.“DX” stands for distant reception. Select “LO” if you want to receive strong stations in the local area, select “DX” if you want to tune into weak- er stations which are further away.

CLOCK 12 Switches between 12-h and 24-h clock display.

CLOCKSET Sets the clock manually. Press << >> to select hours/minutes. Press / to adjust the flashing value.

TIMER 1 The radio will automatically switch to a station you have selected at the time you program.

TIMER 2 You can also program the unit to go to a second sta- tion at a programmed time.

ON VOL Sets the turn-on volume. Press << >> to adjust the turn-on volume as desired.

TOM ON/OFF Turn-on-message.

You can enter a message of up to 40 characters which appears in the dis- play when you switch the unit on.

 

 

CDC NAME Names CDs. A maximum of

/

Select function

99 CDs can be given names

<< >>

Adjust/recall setting

of up to 7 characters.

20

Image 20
Contents Munich CM Page Display Display fieldContents Quick reference Additional rocker switch functions Select CDSelect track Repeat track press once brieflyPreset buttons 1 to MTLDolby PauseSCA Scan Remote control operation@ Preset Scan Traffic safety InstallationAccessories Important notesAffixing the detachable face Detachable faceTheft protection Radio operation Selecting the automatic tuning sensitivity Scanning stations with Radio ScanChanging the scan time Naming radio stationsSetting the Timer Deleting radio station namesDeleting a radio station name Deleting all of the radio station namesCassette deck operation CD changer operation Selecting a track CD Select-By-NameDeleting one CD name Naming CDsDeleting CD names Deleting all CD names Setting the clockClock/Display changes Naming an external audio source Turn On Message TOMDSC programming Overview of the DSC factory settings RM onSpecifications AmplifierTuner CassetteTroubleshooting Guide GeneralRadio reception CD Changer operationError Displays CD ERRK7/VKD 8 622 401