Blaupunkt CM 168 Select CD, Select track, Repeat track press once briefly, SRC Source

Press the button indicating the oppo-

site direction, or / to stop tape winding.

Changer mode (optional)

Select CD

Up

Down

Select track

>>Up: press briefly

CUE - fast forward (audible): hold button down.

<<Down: press two or more times briefly

Repeat track: press once briefly.

REVIEW - fast reverse (audible) - hold button down.

Additional rocker switch functions:

For additional settings use

AUD;

DSC-MODE 4

Important: The corresponding func- tion must be active.

:SRC (Source)

Press button briefly to select the oper- ating mode (tuner, cassette, changer or Aux-in). The active mode will ap- pear in the display.

;AUD

Treble and bass adjustment

You can store different settings for the

FM, AM, cassette, CD-changer mode or Aux-in.

Setting the tone:

•Select the operating mode. Press AUD once and use the rocker switch to set the tone.

Treble +

Treble -

<<Bass -

>>Bass +

For Fader and balance adjustment: press AUD twice.

Fader front Fader rear

<<Balance left

>> Balance right

The selected values will appear in the display. The last setting is stored au- tomatically.

Switching AUD off: Press the button again briefly.

If you do not make any adjustments to the tone within 8 seconds, the AUD mode will quit automatically.

<LD: Loudness

Loudness boosts the bass frequency at low volume.

Loudness on/off: Press LD briefly. “LD” will appear when this setting is active.

Refer to the section on DSC program- ming to adjust Loudness to different levels.

= DIS - Clock display

This unit is equipped with an internal clock.

Display priority

To alter the display priority, press until you hear a beep. Repeat this pro- cedure until the desired display ap- pears.

Temporary display change Press briefly as many times as needed to show the desired informa- tion for a few seconds.

Radio mode

Press this button to switch between the clock, the station name and the frequency.

6