•The cursor will flash at the current po- sition. Press << >> to move the cur- sor.
•Press 
/
to select a character. If you want to enter a blank, select the dash “_”.
•Press DSC to store the name. Press DSC again to quit the DSC mode or press << >> to
If you want to change the name, select the name in the DSC mode and overwrite it in the edit mode. If you want to change just a few of the letters, press << >> to move the cursor to the corresponding position and change only that character.
Deleting radio station names
Deleting a radio station name
Select the DSC mode.
•Press DSC.
•Press 
/
to select
•Press << >> to switch to the station select mode.
•Press 
/
to select the station name you would like to delete.
•Press and hold down DSC.
“ONE NAME” will appear in the dis- play.
•Release the DSC button after 2 sec- onds but before 8 seconds. “DELET- ED” will appear in the display.
•The station name has been deleted. The unit will switch back to DSC mode.
Deleting all of the radio station names
Select the DSC mode.
•Press DSC.
•Press 
/
to select
•Press << >> to switch to the station select mode.
•Press and hold down DSC for 8 sec- onds.
•After 2 seconds and 8 seconds you will hear a beep. “ONE NAME” will ap- pear first in the display, followed by “ALLNAMES”
•Release DSC. “DELETED” will appear in the display. All of the station names have been deleted. The unit will switch back to DSC mode.
Setting the TIMER
Using this unit it is possible to conveniently switch on any two radio stations you select at any time you select. The radio stations can be selected independently of the cur- rently active operating mode.
Proceed as follows:
•Select the radio station of your choice.
•Press DSC.
•Press 
/
to select TIMER 1.
•Press >> to turn the TIMER on. (Press << to turn the TIMER off.).
•Press >> again to select time display. The minutes will flash.
•Press 
/
to set the minutes.
•Press << to activate the hours. (>> back to the minutes).
•Press 
/
to set the hours.
•Press DSC to store your entry. You have now set TIMER 1.
If you would like to set TIMER 2 as well, repeat the steps as described above.
Note
The timers can be turned on and off while any audio source is in use.
ENGLISH
13