IP CONTROL
11.1 Static IP addresses for a number of units
Where you want to connect more than 1 IP Control to the same network and there is no DHCP server, or you want to use static IP addresses, do the following:
Connect the IP Control units one at a time and change the static IP address of each unit before connecting the next unit.
12. Logging into the Web interface
Complete the initial setup via the Web configuration interface:
1.Open your Web browser (Internet Explorer version 6.0 or higher).
2.Type the IP Control system IP address - https://IP address/config - and press Enter. The login page appears, see Figure 5.
Figure 5 Login page
3.Type the default Administrator user name - admin - and password - access - (both lower case).
4.Press Enter. The Web interface opens at the Network Configuration page. See Figure 6.
5.Bookmark the page for easy reference.
Figure 6 IP Control Web interface
9