USER GUIDE
23.6.3Auto Video Adjust
To adjust the video automatically:
Click Auto Video Adjust. The process takes a few seconds. If the process runs for more than 3 times, there is an abnormal noise level. Check the video cable and verify that no dynamic video application is running on the Target Server’s desktop.
Perform the procedure where necessary for each Target Server or new screen resolution.
23.7 Power cycle
Where a Minicom Remote Power switch is connected to the Serial port of the IP Control, you can power manage the Target servers as follows:
From the Toolbar, click . The Power menu appears, see below.
Figure 18 Power menu
To send a power cycle command or to power down or up the currently accessed Target server, select the appropriate option.
Note! Only the currently accessed Target server is affected, so to power manage other Target servers you must access each one individually.
23.8 Keyboard key sequences
Click . A list of defined keyboard sequences appears. When clicked, these transmit directly to the Target Server, and will not affect the Client computer.
For example, select
To add a keyboard sequence:
Click Add/Remove. The Special Key Manager box appears see Figure 19.
22