USER GUIDE
To edit a key sequence:
1.From the Special Key Manager box select the desired key.
2.Click Edit.
3.Click Start Recording
4.Press the desired keys. The keys appear in the area provided.
5.Click Stop Recording.
6.Click OK.
23.9 Synchronizing mouse pointers
When working at the Client computer, two mouse pointers appear: The Client computer’s is on top of the Target Server’s. The mouse pointers should be synchronized. The following explains what to do if they are not synchronized.
Warning
Before synchronizing mouse pointers adjust the video of the Target Server, (explained above) otherwise mouse synchronization may not work..
23.9.1 Aligning the mice pointers
When accessing the Target Server, the mice may appear at a distance to each other. To align the mouse pointers:
From the Toolbar click 
/ Align or press Ctrl+M simultaneously. The mice align.
23.9.2 Calibrating mice pointers
A Target Server may have a different mouse pointer speed to the Client computer. Calibrating automatically discovers the mouse speed of the Target Server and aligns the two pointers.
To perform the calibration when the Target Server Operating system is, Windows NT4, 2000 or 98:
From the Toolbar click 
/ Calibrate. IP Control saves this alignment so calibration is only needed once per Target Server.
If the Video Noise Level is above zero, calibration may not work. Go to Video Adjustment and try to eliminate the noise by pressing Auto video adjust and/or adjusting the bars in Manual video adjust, then perform the mouse calibration.
24