IP CONTROL
Note! If the mouse settings on the Target Server were ever changed, you must synchronize mouse pointers manually, as explained below.
23.9.3 Manual mice synchronization
If the mouse settings on the Target Server were ever changed, or when the Operating system on the Target Server is, Windows XP / 2003 Server / Vista, Linux, Novell, SCO UNIX or SUN Solaris you must synchronize the mouse pointers manually.
To manually synchronize mouse pointers:
1.From the Toolbar click / Manual Settings. The Mouse Settings box appears see Figure 21.
Figure 21 Mouse Settings box
2.Select the Target Server’s Operating System and click OK. Instructions and sliders appear.
3.Follow the instructions and set any relevant sliders to the same values as set in the Target Server’s Mouse Properties window.
2 examples!
For Windows XP, go to the Mouse settings on the Target Server and uncheck Enhance pointer precision.
For Windows NT4. If Mouse Properties were ever changed for the Target Server –
even if they have been returned to their original state - uncheck default - . Click OK. The mouse pointers should be synchronized.
25