USER GUIDE
7. Terminology
Below are some terms and their meanings used in this guide.
Term | Meaning |
|
|
Target server | The computers/servers that are accessed remotely via the IP |
| Control. |
|
|
Client computer | The PC running a remote IP Control session |
|
|
Remote Session | The process of accessing and controlling Target Servers |
| connected to IP Control from a User workstation |
|
|
8. Client computer operating system
Windows 2000 or higher, with Internet Explorer 6.0 or later version. 128 bit encryption support is required.
9. Connecting the system
Connect the Target Server / KVM switch to the IP Control as follows:
1.Connect the single connector of the KVM cable to the KVM In port of the IP Control.
2.Connect the other end of the KVM cable to the KVM ports of the Target Server / KVM switch.
3.Connect a Network cable to the IP Control LAN port and to an Ethernet port on your Network switch.
4.Connect the power adapter.
Figure 3 and Figure 4 illustrate the connections to a computer and KVM switch respectively, with the optional KVM console.
6