IP CONTROL
To do so:
1.From the menu click Switch Configuration. The KVM Switch Configuration window appears, see Figure 8.
Figure 8 Switch Configuration
2.Choose the manufacturer and model of the connected KVM switch. The number of possible connected servers appears in the Server Name section.
3.Change the name of the connected servers by highlighting the server and typing
a new name. Click 
to save changes.
Note! Server names left as UNUSED cannot be accessed.
Sync. Caps/Scroll/Num Lock State – Check to synchronize the Caps, Scroll and Num Lock keys state between the remote console keyboard and Target server. If left unchecked, the remote console keyboard may not reflect the status of the above keys as set on the Target server.
Install switch definition file
Where the KVM switch type is not listed in the manufacturer/model
1.Load the file onto the Client computer.
2.Locate and install the KVM switch definition file. The switch definition file is replaced.
13