Milan Technology MIL-W1311, MIL-W0311 manual Data Serial Port Screen, Modem, Internet Access

	Serial Port
Data - Serial Port Screen
Modem
Type	Select None if nothing is connected to the Serial Port, or you do not wish use
	to use the Serial Port.

For Permanent Connection (leased line):

•Ensure the Serial Line Speed is set to match the speed on your leased line.

•Ignore the Telephone numbers and "Disconnect after Idle" setting.

For Modem:

•If your modem is in the drop-down list, just select it.

•If your modem is not in the list, select "_Standard Modem" and test to see if this works.

•If "_Standard Modem" does not work, select "Other", then click the Modem Properties button and set these settings correctly. See the sec- tion Modem Properties Screen later in this chapter for further details.

Modem	Clicking this button will open the Modem Properties screen and allow
Properties	changing of the modem's properties. Normally, this is not required.
	See the section Modem Properties Screen later in this chapter for further
	details.
Serial Line	Select the speed which is equal to or below the fastest Serial line speed
Speed	(NOT Phone line speed) of your modem. Available speeds range from 4.8K
	to 460.8K (bps).
Internet Access
Enable	Use this to enable or disable Internet access on this port.
Internet	Checking this box will disable Internet Access via the WAN (Ethernet)
Access
	port, because both methods cannot be used simultaneously.
	However, for the Serial Port, both Dial-in and Internet can be enabled
	simultaneously.
Dial on	If checked, an Internet connection will be established automatically, when-
Demand	ever required.
	If not checked, the Internet connection must be established manually, using
	the Dial-up button on the Serial Port Status screen.
Disconnect	If checked, an Internet connection will be terminated after the specified time-
after Idle	out period. The allowable range is 1-99 minutes.
Time	If not checked, the Internet connection will never be terminated.
Account	Enter the account name provided by your ISP. This name will be used to log
User Name	in to the ISP's server.
Password	Enter the current password for the above account.
	Re-enter the password in the Verify field to ensure it is correct.

43