Milan Technology MIL-W0311 Connecting to the Virtual Servers, Internal Port, Number External Port

Wireless Gateway User Guide

Internal Port	Enter the port number used by the Server to connect to clients.
Number
External Port	The port number used by clients when connecting to the Server. This is
Number	normally the same as the Internal Port Number.
	If it is different, this device will perform a "mapping" or "translation"
	function, allowing the server to use one port address, while clients use a
	different port address.
Buttons
Clear Form	Clears all data, ready for input of a new entry.
Add	Add a new entry, using the data shown on screen.
	The name shown in the drop-down list is ignored.
Delete	Delete the Virtual Server entry selected in the drop-down list, regardless of
	whether its details are shown on screen.
Update	Update the Virtual Server entry selected in the drop-down list, using the
	data shown on screen.
List All	List all User-defined Virtual Servers.
Cancel	Reverse any changes made since the last "submit" operation (i.e. since
	clicking any other button).
		From the Internet, ALL Virtual Servers have the
		IP Address allocated by your ISP, as shown by
		the "WAN IP Address".

Connecting to the Virtual Servers

Once configured, anyone on the Internet can connect to your Virtual Servers. They must use the WAN Port IP Address (the IP Address allocated to this device by your ISP).

e.g.

http://203.70.212.52

ftp://203.70.212.52

It is more convenient if you are using a Fixed IP Address from your ISP, rather than Dynamic. If using a Fixed IP Address, it is entered on the WAN screen.

72