Milan Technology MIL-W1311 Data Modem Properties Screen, Initial String, Other Properties

Serial Port

Status

Use this link to view the Serial Port status screen, described later in this chapter.

Modem Properties Screen

This screen will be displayed when the "Modem Properties" button on the Serial Port screen is clicked. Normally, it is not necessary to access this screen.

Figure 20: Modem Properties Screen

Data – Modem Properties Screen

Initial String

Initial String	This is a series of AT commands used to correctly configure your modem
	or ISDN.
	•	The Initial String can only be changed for the "Other" modem type.
	•	See Appendix C - AT Commands for further details about the
		required Initial String settings and standard AT commands.

Other Properties

Dial Type	Select Tone, Pulse or Other to match your system. For Other, you must
	provide the Dial String.
Dial String	The AT command sent to your modem before dialing. For example,
	"ATDT" tells your modem to use Tone Dialing.
	Check your modem's documentation to find the correct AT commands.
Auto Answer	Enter the command strings which turn the "auto-answer" function in your
Commands	modem or ISDN TA ON and OFF.

45