|
|
| Options | |
|
|
|
| |
| Printer Object Type | Sets the type of printer attached. The default setting is "Laser- | ||
|
| Writer". If the attached printer is not a LaserWriter (or | ||
|
| compatible), then you must: | ||
|
| • | Install the correct printer driver for the printer on each Apple | |
|
|
| system requiring printer access | |
|
| • | Check your Printer's user manual or manufacturer's Web site | |
|
|
| and find the correct "Printer Object Type" | |
|
| • | Enter the correct "Printer Object Type" on this screen. | |
|
| If the "Printer Object Type" is incorrect, the printer will not be | ||
|
| visible from your Apple system. | ||
|
|
|
| |
| Communication | You must use the same setting as your Macintosh. | ||
| Protocol |
|
|
|
|
|
|
|
|
| Logical Printers |
|
|
|
| No (L1, L2, L3) | There are 3 Logical Printers (Ports), named L1, L2, and L3. |
| |
|
| These names can not be changed, and must be used when select- | ||
|
| ing the logical printer from your Unix system. | ||
|
|
|
| |
|
| Enter (in HEX) the series of printer commands to be sent to the | ||
|
| attached printer BEFORE each print job. | ||
|
|
|
| |
|
| Enter (in HEX) the series of printer commands to be sent to the | ||
|
| attached printer AFTER each print job. | ||
|
|
|
| |
| LF to CR/LF | If checked, | ||
|
| line will be converted to CR/LF (carriage return/line feed) pairs, | ||
|
| as used in MSDOS and Windows. | ||
|
|
|
|
|
| Printer Status |
|
|
|
| Printer Status | This indicates the current status of the printer. Possible values are: |
| |
|
| • | Idle | |
|
| • | Printing | |
|
| • | ||
|
| • | Out of paper | |
|
|
|
| |
| "Refresh" Button | Click this to update the printer status information | ||
|
|
|
|
|
57