Milan Technology MIL-W1311, MIL-W0311 manual Managing User Defined Virtual Servers, Select Server

Advanced Internet

Managing User Defined Virtual Servers

Enable a Server

Disable a Server Disable all Servers

Delete

Modify (Edit)

Create a new entry

1.Select the required entry from the drop-down list

2.Click "Get Data"

3.Check the Enable checkbox

4.Click "Update"

As above, but uncheck the Enable checkbox.

On the Advanced Internet screen, you can Enable or Disable the Virtual Servers feature.

1.Select the entry from the drop-down list

2.Click "Delete"

1.Select the entry from the drop-down list

2.Click "Get Data"

3.Make any desired changes

4.Click "Update"

1.Click "Clear Form"

2.Enter the required data, as described below.

3.Click "Add".

Data- User Defined Virtual Servers Screen

WAN IP Address

Current IP Address

This shows the IP Address which Internet users must use to connect to any of your Virtual Servers.

•To Internet Users, ALL your Virtual Servers have the same IP Ad- dress.

•This IP Address is allocated by your ISP. It is better to have a fixed IP Address.

Select Server

Name	This lists any Servers you have defined. Click the "Get Data" button to
	view the correct data for the selected Server.
Get Data	After selecting the desired entry, click this button to view its current
Button	settings in the Details section of the screen.
	You can then make any changes required. Click the "Update" button to
	save your changes.
Details
Name	Enter a descriptive name to identify this Server entry.
Enable	Use this to Enable or Disable support for this Server, as required.
IP Address	The IP Address of the PC on your LAN which is running the Server
	software.
Protocol	Select the protocol (TCP or UDP) used by the Server.

71