Operating the Smart 108/116 IP Switching System Locally
Using the OSD
Figure 52 – OSD Main Window
Lines with yellow text show active computers. Lines with blue text sho w inactive computers. The Type coluumn indicates that a computer “C” is connecteed to the port.
6.2.1Navigating the OSSD
You can navigate the OSD, as follows:
To move up and down – Use the Up and Down arrow keys.
To jump from one columnn to the next (when relevant) – Use the Tab key.
To exit the OSD or returnn to a previous window within the OSD – Press Esc.
6.2.2Selecting a Computer
To select a computer:
1.Navigate to the desired computer line.
OR
Type the port number of the desired computer.
2.Press Enter.
The selected computer is accessed. A Confirmation label appears showwing which computer is accessed.
When the OSD is dispplayed, you cannot select computers using thee keyboard hotkeys.
6.2.3Configuring the OSD Settings
You can configure the followiing OSD settings:
General (see Section 6.2.4)
62 Smart 108/116 IP