LSI 25083 manual SAS Controller Descriptions

The SAS controllers support the ANSI Serial Attached SCSI standard, version 2.0. In addition, the controller supports the SATA II protocol defined by the Serial ATA specification, version 1.0a. Supporting both the SAS interface and the SATA II interface, the SAS controller is a versatile controller that provides the backbone of both server and high-end workstation environments.

Each port on the SAS RAID controller supports SAS devices, SATA II devices, or both, using the following protocols:

•SAS Serial SCSI Protocol (SSP), which enables communication with other SAS devices

•SATA II, which enables communication with other SATA II devices

•Serial Management Protocol (SMP), which communicates topology management information directly with an attached SAS expander device

•Serial Tunneling Protocol (STP), which enables communication with a SATA II device through an attached expander

1.2SAS Controller Descriptions

The 6Gb/s SAS RAID controllers are described as follows:

•The MegaRAID SAS 9240-4i PCI Express 2.0 Low-Profile Serial-Attached SCSI/SATA II Disk Array Controller is a PCI-Express 2.0, half-size, full-height RAID controller based on the LSISAS2008 PCI Express-SAS/SATA I/O Processor chip. The MegaRAID SAS 9240-4i controls four internal 6-Gb/s SAS/SATA ports through one SFF-8087 x4 internal mini SAS connector.

•The MegaRAID SAS 9240-8i PCI Express 2.0 Low-Profile Serial-Attached SCSI/SATA II Disk Array Controller is a PCI-Express 2.0, half-size, full-height RAID controller based on the LSISAS2008 PCI Express-SAS/SATA I/O Processor chip. The MegaRAID SAS 9240-8i controls eight internal 6-Gb/s SAS/SATA ports through two SFF-8087 x4 internal mini SAS connectors.

•The MegaRAID 6Gb/s SAS 9260-4i PCI Express 2.0 Low-Profile Serial-Attached SCSI/SATA II Disk Array Controller controls four internal SAS/SATA ports through one SFF-8087 x4 internal mini SAS connector.

SAS Controller Descriptions 1-3

Copyright © 2009 by LSI Corporation. All rights reserved.