Preface
This document is the primary reference and user’s guide for the LSI MegaRAID® Serial Attached SCSI/SATA II RAID controllers based on the 6Gb/s SAS/SATA RAID On-a-Chip devices. This document contains complete installation instructions for these RAID controllers and includes specifications for them.
The MegaRAID 6Gb/s Serial Attached SCSI (SAS) RAID controller family consists of the following controllers:
•MegaRAID SAS 9240-4i PCI Express 2.0 Low-Profile Serial-Attached SCSI/SATA II Disk Array Controller with an Internal Connector
•MegaRAID SAS 9240-8i PCI Express 2.0 Low-Profile Serial-Attached SCSI/SATA II Disk Array Controller with Internal Connectors
•MegaRAID SAS 9260-4i PCI Express 2.0 Low-Profile Serial- Attached SCSI/SATA II Disk Array Controller with an Internal Connector
•MegaRAID SAS 9260-8i PCI Express 2.0 Low-Profile Serial-Attached SCSI/SATA II Disk Array Controller with Internal Connectors
•MegaRAID SAS 9260DE-8i PCI Express 2.0 Low-Profile Serial-Attached SCSI/SATA II Disk Array Controller with Internal Connectors
•MegaRAID SAS 9261-8i PCI Express 2.0 Low-Profile Serial-Attached SCSI/SATA II Disk Array Controller with Internal Connectors
•MegaRAID SAS 9280-4i/4e PCI Express 2.0 Low-Profile Serial-Attached SCSI/SATA II Disk Array Controller with an Internal Connector and an External Connector
MegaRAID 6Gb/s SAS RAID Controllers User’s Guide | iii |
Copyright © 2009 by LSI Corporation. All rights reserved.