Step 2. Plug the HDD connector on the other end of the internal cable into the connector on the SAS drive or the SATA II drive.
Step 3. If you have another drive, connect it to another plug on the internal cable.
You can connect other devices if the cable has more connectors.
Figure 2.5 Connecting the SAS 9260-8i RAID Controller to a Drive
HDD
Connector
Power
Connector
2.5.2Connecting the SAS RAID Controller with External Connectors to a Drive Enclosure
This section provides
MegaRAID SAS Hardware Installation | |
| Copyright © 2009 by LSI Corporation. All rights reserved. |