Chapter 3: Creating Mirrored Volumes Other Configuration Tasks | SAS2 Integrated RAID Solution User Guide |
Figure 7: Boot Device on SAS Topology Window
If a device is currently designated as the alternate boot device, the Device Info column shows the word Alt.
3.To select the preferred boot disk, move the cursor to the disk, and press Alt + B.
4.To remove the boot designator, move the cursor to the current boot disk, and press Alt + B.
This controller no longer has a disk designated as boot.
5.To change the boot disk, move the cursor to the new boot disk, and press Alt + B. The Boot designator moves to this disk.
6.To select an alternate boot disk, move the cursor to the disk, and press Alt + A.
NOTE: To change the alternate boot device from one disk to another, follow steps 4 and 5, but use Alt + A instead of Alt + B.
Page 22 | LSI Corporation Confidential August 2010 |