Lucent Technologies P333T manual Configuring the Switch, Cajun P330 Default Settings

Page 29

Chapter 4 Installation and Setup

Configuring the Switch

The Cajun P333T may be configured using the text-based “Command Line Interface” (CLI) utility, the stand-alone Cajun P330 Manager or CajunView.

For instructions on the text-based utility, see the CLI chapter.

For instructions on installation of the graphical user interfaces, refer to the “Cajun P330 Manager” appendix. For instructions on the use of the graphical user interfaces, refer to the Manager User’s Guide on the Management CD.

Cajun P330 Default Settings

The default settings for the Cajun P330 switch and its ports are determined by the Cajun P330 software. These default settings are subject to change in newer versions of the Cajun P330 software. See the Release Notes for the most up-to-date settings.

Switch Settings

 

Table 4.1

Default Switch Settings

 

 

 

 

 

Function

Default Setting

 

 

 

 

 

 

 

Cajun P330 IP Address

149.49.32.134

 

 

 

 

Default Gateway

0.0.0.0

 

 

 

 

VLANs

VLAN 1

 

 

 

 

Spanning Tree

Enabled

 

 

 

 

Cajun P333T User’s Guide

19

Page 28 Page 30
Image 29
Page 28 Page 30
Contents Cajun P333T Page Contents Cajun P333T User’s Guide Mtbf Mtbf Cajun P333T LEDs List of FiguresList of Figures Cajun P333T User’s Guide List of Tables List of Tables Viii Cajun P333T User’s Guide Overview Cajun P330 Family FeaturesAuto-Negotiation Layer 2 FeaturesCongestion Control VLANsCajun P330 Standards Supported Durability Cajun P330 Network ManagementCajun P330 Manager CajunViewRmon MIBs RFC Cajun P330 Network MonitoringSmon MIBs RFC Port MirroringChapter Overview Cajun P333T User’s Guide Cajun P333T Front Panel Cajun P333T Front and Rear PanelsPWR FDX Cajun P333T AC and DC Back Panels Cajun P333T Back PanelApplication ApplicationsCajun P330 stacks with a Cajun 330 backbone Installing Stacking Sub-modules Installation and SetupInstalling the Stacking Sub-module in the Cajun P330 PositioningCajun P333T Rack Mounting Rack MountingTo connect stacked switches Connecting Stacked SwitchesIncorrect Stack Connection Removing an Existing Expansion Sub-module Installing Expansion Sub-modulesInstalling the Expansion Sub-module into the Cajun P330 Powering On Cajun P330 Module DC Powering On Cajun P330 Module ACCajun P330 Default Settings Configuring the SwitchCabling 1000BASE-SLX Connecting to the Serial PortAssigning Cajun P330’s IP Stack Address Conventions Used Cajun Campus CLI Command Line InterfaceEstablishing a Serial Connection for Configuration For example telnet Establishing a Telnet SessionRunning the CLI Entering the User Level Security LevelsEntering the Privileged Level Entering the Supervisor LevelTop and Up commands General CommandsRetstatus command Tree commandCommand Abbreviations Command SyntaxNavigation, Cursor Movement and Shortcuts Getting HelpHow Commands are Organized Commands, Parameters and Default SettingsCommand Hierarchy Cajun Campus CLI Command Line Interface Flowcontrol Trunk Vlan Show time command User Level CommandsShow timeout command Show timezone commandShow image version command Show ntp commandShow system command Show snmp command Show port command Show interface commandField Description Show module commandShow module command Console show flowcontrol Show flowcontrol commandField Show cam commandShow trunk command Show spantree command Addr Show log commandShow download status command Disable command Privileged Level CommandsSet commands Set enablepass commandSet ip route command Set logout commandSet ntp server command Set snmp community read-onlyread Set snmp community commandSet snmp trap rcvraddr Set snmp trap commandSet system name command Set system location commandSet system location string Set system name stringSet interface command Set system contact commandSet port level command Set system contact stringSet port enable command Set port negotiation commandSet port duplex command Set port disable commandSet port speed command Set Vlan command Set flowcontrol command Set trunk command Set spantree priority command Set spantree enable commandSet spantree disable command Sync time command Set Smon License CommandGet time command Clear CommandsClear cam command Clear snmp trap commandClear Vlan command Reset command Download commandTo reset module Set defpass command Supervisor Level CommandsSet super password command Cajun P330 Switch SpecificationsPower Requirements AC Power Requirements DCSafety DC Safety ACEnvironmental EMC EmissionsStacking Sub-module Laser SafetyExpansion Sub-modules Standards ComplianceLaser Data Laser ClassificationUsage Restriction Ethernet/Fast Ethernet Expansion Sub-module Fast Ethernet Fiber Expansion Sub-modulePower Requirements Backup Power Supply BupsSafety Mtbf System Requirements InstallationCajun P330 Standalone Manager Software Download Documentation and Online Help+972 3 645 How to Contact UsCajun P333T User’s Guide
Related manuals
Manual 12 pages 58.95 Kb

P333T specifications

Lucent Technologies P333T is a highly regarded networking device that has made significant contributions to the telecommunications field. Primarily designed for service providers and large organizations, it is recognized for its robust architecture, which is tailored to handle high-capacity data processing and seamless voice integration.

One of the standout features of the P333T is its support for multiple types of network interfaces, including Ethernet and ATM. This versatility allows organizations to integrate the device into various types of network environments, thereby ensuring compatibility with existing infrastructure. Additionally, the P333T supports both IP and legacy protocols, making it suitable for a wide range of applications and use cases.

The P333T is equipped with advanced packet processing capabilities, enabling efficient data handling and routing. This is particularly important in today's data-driven world, where fast and reliable connections are paramount. The multi-service capabilities of the P333T allow it to effectively manage voice, video, and data traffic simultaneously, thus optimizing the overall performance of the network.

Another significant attribute of the P333T is its modular design. This feature enables organizations to easily upgrade or replace components according to their evolving needs. The ability to scale up as required is essential for businesses looking to future-proof their investments and ensure longevity in their network solutions.

In terms of management and monitoring, the P333T offers sophisticated tools that facilitate easy configuration and monitoring. These tools assist network administrators in maintaining optimal performance and troubleshooting any issues that may arise. This user-friendly management interface allows for efficient operation and helps reduce downtime, which is crucial in maintaining service quality.

Security is also a critical aspect of the P333T architecture. It includes features designed to protect against unauthorized access and ensure data integrity. This emphasis on security is particularly relevant for organizations handling sensitive information or operating in regulated industries.

Overall, the Lucent Technologies P333T represents a well-engineered solution that combines flexibility, performance, and security. With its range of features and technologies, it empowers organizations to meet their current networking needs while being prepared for future advancements. Its reliability, scalability, and robust capabilities make it a prominent choice for service providers and enterprises alike, solidifying its legacy in the telecommunications landscape.
Top Page Image Contents