Lucent Technologies P333T manual Environmental, Safety AC, Safety DC, EMC Emissions, Interfaces

Page 72

Environmental
Operating Temp.	-5 – 500C (23-1220F)
Rel. Humidity	5% to 95% non-condensing

Safety – AC

•UL for US approved according to UL195O Std.

•C-UL(UL for Canada) approved according to C22.2 No.950 Std.

•CE for Europe approved according to EN 60950 Std.

•Laser components are Laser Class I approved:

—EN-60825/IEC-825 for Europe

—FDA CFR 1040 for USA

Safety – DC

•Restricted Area Access: This device should only be installed in a restricted access area.

•Installation Codes: This device must be installed in accordance with the US National Electrical Code, Articles 110-26 and 110-27, and the Canadian Electrical Code, Section 12.

•Overcurrent Protection: A readily accessible Listed branch-circuit overcurrent protective device with a 15A rating must be incorporated in the building wiring.

EMC Emissions

Emissions

Approved according to:

•US -FCC Part 15 sub part J, class A

•Europe - EN55022 class A

Immunity

Approved according to:

•EN 50082-1

Interfaces

•24 x 10/100BASE-T RJ45 port connectors.

•RS-232 for terminal setup via RJ45 connector on front panel.

62	Cajun P333T User’s Guide

Image 72

Contents

Cajun P333T Page Contents Cajun P333T User’s Guide Mtbf Mtbf List of Figures Cajun P333T LEDsList of Figures Cajun P333T User’s Guide List of Tables List of Tables Viii Cajun P333T User’s Guide Cajun P330 Family Features OverviewLayer 2 Features Auto-NegotiationCongestion Control VLANsCajun P330 Standards Supported Cajun P330 Network Management DurabilityCajun P330 Manager CajunViewCajun P330 Network Monitoring Rmon MIBs RFCSmon MIBs RFC Port MirroringChapter Overview Cajun P333T User’s Guide Cajun P333T Front and Rear Panels Cajun P333T Front PanelPWR FDX Cajun P333T Back Panel Cajun P333T AC and DC Back PanelsApplications ApplicationCajun P330 stacks with a Cajun 330 backbone Installation and Setup Installing Stacking Sub-modulesInstalling the Stacking Sub-module in the Cajun P330 PositioningRack Mounting Cajun P333T Rack MountingConnecting Stacked Switches To connect stacked switchesIncorrect Stack Connection Installing Expansion Sub-modules Installing the Expansion Sub-module into the Cajun P330Removing an Existing Expansion Sub-module Powering On Cajun P330 Module AC Powering On Cajun P330 Module DCConfiguring the Switch Cajun P330 Default SettingsCabling Connecting to the Serial Port 1000BASE-SLXAssigning Cajun P330’s IP Stack Address Cajun Campus CLI Command Line Interface Establishing a Serial Connection for ConfigurationConventions Used Establishing a Telnet Session For example telnetRunning the CLI Security Levels Entering the User LevelEntering the Privileged Level Entering the Supervisor LevelGeneral Commands Top and Up commandsRetstatus command Tree commandCommand Syntax Command AbbreviationsNavigation, Cursor Movement and Shortcuts Getting HelpCommands, Parameters and Default Settings Command HierarchyHow Commands are Organized Cajun Campus CLI Command Line Interface Flowcontrol Trunk Vlan User Level Commands Show time commandShow timeout command Show timezone commandShow ntp command Show system commandShow image version command Show snmp command Show interface command Show port commandShow module command Show module commandField Description Show flowcontrol command Console show flowcontrolShow cam command FieldShow trunk command Show spantree command Show log command AddrShow download status command Privileged Level Commands Disable commandSet commands Set enablepass commandSet logout command Set ntp server commandSet ip route command Set snmp community command Set snmp community read-onlyreadSet snmp trap command Set snmp trap rcvraddrSet system location command Set system name commandSet system location string Set system name stringSet system contact command Set interface commandSet port level command Set system contact stringSet port negotiation command Set port enable commandSet port disable command Set port speed commandSet port duplex command Set Vlan command Set flowcontrol command Set trunk command Set spantree enable command Set spantree disable commandSet spantree priority command Set Smon License Command Sync time commandGet time command Clear CommandsClear snmp trap command Clear Vlan commandClear cam command Download command Reset commandTo reset module Supervisor Level Commands Set super password commandSet defpass command Specifications Cajun P330 SwitchPower Requirements AC Power Requirements DCSafety AC Safety DCEnvironmental EMC EmissionsLaser Safety Stacking Sub-moduleExpansion Sub-modules Standards ComplianceLaser Classification Usage RestrictionLaser Data Fast Ethernet Fiber Expansion Sub-module Ethernet/Fast Ethernet Expansion Sub-moduleBackup Power Supply Bups Power RequirementsSafety Mtbf Installation Cajun P330 Standalone ManagerSystem Requirements Documentation and Online Help Software DownloadHow to Contact Us +972 3 645Cajun P333T User’s Guide

Related manuals

Manual 12 pages 58.95 Kb