Lucent Technologies P550R, P220 manual Dvmrp Commands, Threshold 0,127,255

Table 1-4: Buffering Commands (Continued)

Old Command	New Command	New Definition/Argument
show buffering	N/A	<fabric-port-spec>– fabric port specifier - (#/
fabric-port		#, #/FORE, #/#-#/# on P550)
[<fabric-port-spec>		(CPU,G1,G2,G3,G4,G5,G6,G7,A1 on P220G)
[...,<fabric-port-		(CPU,G1,A1,1-12,13-24 on P220).
spec>]]
show buffering port	show buffering port	<mod-swport-spec>– switch port specifier -
[<mod-port-spec>	[<mod-swport-spec>	(#/# on P550/P550R) (A1...A4 on P220G)
[…,<mod-port-	[…,<mod-swport-	(A1...A4, 1...24 on P220).
spec>]]	spec>]

DVMRP Commands

Table 1-5 shows new and changed DVMRP Commands in Release 4.0.1:

Table 1-5: DVMRP Commands

Old Command	New Command	New Definition/Argument
To Enable:	N/A	A tunnel endpoint address must be set
ip dvmrp interface		before a DVMRP interface is config-
type {broadcast		ured to be a tunnel. Use the [no] ip
		dvmrp remote-tunnel-address
nonEncapsulatedTunnel
		<IP-address>command to set the
IPIPTunnel}
		tunnel endpoint address.
To Disable:
[no] ip dvmrp
interface type
To Enable:	To Enable:	{0,127,255} – The TTL (time-to-live)
ip multicast ttl-	ip multicast ttl-	threshold.
threshold <ttl-thresh>	threshold {0,127,255}
To Disable:	To Disable:
[no] ip multicast ttl-	no ip multicast ttl-
threshold	threshold
show ip dvmrp	N/A	System Supported: P550R
forwarding cache

Cajun P220, P550, P550R Switch Release Notes, Release 4.0.1 27