Lucent Technologies P550R, P220 manual Ipx-network.next-hop

Table 1-17: UI Commands (Continued)

Old Command	New Command	New Definition/Argument
N/A	ping ipx <ipx-	Check the IPX host reachability and
	network.next-hop-node>	network connectivity.
	[<count> [<delay>	• <ipx-network.next-hop-
	[<size>	node> – the IPX Address of the
	[<timeout>[quiet]]]]]	host to ping. IPX-network is a
		hexadecimal number between 1
		and 8 digits long, and next-hop-
		node form is aa:bb:cc:dd:ee:ff.
		• <count> – the number of ping
		attempts you want to perform
		with this operation. The default is
		1.
		• <delay> – the number of
		milliseconds the switch waits
		between generating pings. The
		default is 1.
		• <size> – the size of the packet,
		excluding the MAC, IPX and PING
		headers, sent during a ping
		operation. The default is 256.
		• <timeout> – the number of
		seconds to wait for a reply. The
		default is 2.
		• quiet – specify this parameter to
		disable the display of the ping
		operation in progress.
		Command Mode: Privileged
		System Supported: P550R
N/A	show users	Display a list of users who are cur-
		rently logged into the switch.
		Command Mode: User

Cajun P220, P550, P550R Switch Release Notes, Release 4.0.1 41