Lucent Technologies P550R, P220 manual Addrif, Namestatic

Table 1-7: IP Commands (Continued)

Old Command	New Command	New Definition/Argument
N/A	clear tcp all	Clear all TCP connections that aren't
		in the listening state.
		Command Mode: Configuration
N/A	clear tcp local <ip-	Clear the TCP connection specified by
	address> <tcp-port>	the local IP address and port and
	remote <ip-address>	remote IP address and port.
	<tcp-port>	Command Mode: Configuration
N/A	To Enable:	Enable or disable the designation of
	ip bootp-dhcp gateway	this interface as the preferred receiver
		of BOOTP/DHCP requests received on
	To Disable:	a VLAN.
	[no} ip bootp-dhcp	This is useful with multinetted inter-
	gateway	faces. If no multinetted interface has
		this parameter set to Enabled or is not
		UP, the router chooses an interface to
		receive the BOOTP/DHCP request.
		Command Mode: Interface
		System Supported: P550R
ip max-arp-entries	To Enable:	The no form of this command restores
<value>	N/A	the maximum number of ARP cache
		entries to the default, which is 16384.
	To Disable:	System Supported: P550R
	[no] ip max-arp-entries
ip max-route-entries	To Enable:	The no form of this command restores
<value>	N/A	the maximum number of routes to the
		default which, is 16384.
	To Disable:	System Supported: P550R
	[no] ip max-route-
	entries
To Enable:	N/A	The default state is enabled, unless
ip redirects		VRRP is configured.
To Disable:		System Supported: P550R
[no] ip redirects
ip telnet inactivity-	To Enable:	Use the no form of this command to
period <timeout>	N/A	restore the default, which is 900 sec-
		onds, or 15 minutes.
	To Disable:	System Supported: P550R
	[no] ip telnet
	inactivity-period
N/A	show arp [<ip	Display the Address Resolution Proto-
	addr>][<if-	col (ARP) cache.
	name>][static]	This command is equivalent to the
		show ip arp command.
		•	ip-addr– the IP address.
		•	if-name– the interface name.
		•	static – displays static arp
			information.
		Command Mode: User
		System Supported: P550R

Cajun P220, P550, P550R Switch Release Notes, Release 4.0.1 29